Sound Devices A10-RACK Powering & Wireless System for 4x Superslot Receivers

£2,450.00 (£2,041.67 Exc. VAT)
(RRP: £2,484.00) You save: £34.00!
Last 1 left
Sound Devices A10-RACK Powering & Wireless System for 4x Superslot Receivers
Sound Devices A10-RACK Powering & Wireless System for 4x Superslot Receivers
Sound Devices A10-RACK Powering & Wireless System for 4x Superslot Receivers
Sound Devices A10-RACK Powering & Wireless System for 4x Superslot Receivers

Sound Devices A10-RACK Powering & Wireless System for 4x Superslot Receivers

£2,450.00 (£2,041.67 Exc. VAT)
(RRP: £2,484.00) You save: £34.00!
Last 1 left
Brand: Sound DevicesModel: 8284 (A10-RACK)
+
Key Features:
  • Accepts up to four, two-channel wireless receivers
  • Audio output on analogue/AES3 and Dante
  • Built-in power distribution & antenna distribution
  • Compatible with select Audio Ltd, Lectrosonics & Wisycom
See More...
S-AUL-A10-RACK-8284
Information

Sound Devices A10-RACK Powering & Wireless System for 4x Superslot Receivers

The A10-RACK offers convenient mounting, powering, RF, and audio connectivity for four uni- or SuperSlot wireless receivers in its 1 RU chassis. It is designed for dual-channel receivers from Audio Limited, including the A10-RX, plus slot receivers from Lectrosonics and Wisycom. The A10-RACK includes built-in antenna distribution with powering for active antennas. Up to eight channels of audio from single or dual-channel receivers appear on both its XLR outputs and over Dante™ audio-over-Ethernet.

Features

  • Accepts up to four, two-channel wireless receivers (receivers sold separately)
  • Audio output on analogue/AES3 and Dante
  • Built-in power distribution
  • Built-in antenna distribution with selectable power for active antennas
  • Powered from 4-pin XLR input (10-18 VDC)
  • USB port for firmware updates and serial access

Dante

Dante™ audio networking offers the convenience of a single CAT5 Ethernet connection to carry the audio signal from the eight channels of the A10-RACK. Dante is alway active, whether the receiver is set for analogue or AES digital output. When used with other Dante-compatible devices, complex systems with comprehensive routing can be built. Monitoring and routing of signals from transmitters to receivers is simplified with Dante Controller, a free software application from Audinate.

RF Distribution

The A10-RACK has an integrated RF distribution amplifier. Its two RF inputs offer selectable 12 V powering for active antennas, plus loop-thru connections for another A10-RACK. A single pair of antennas can be used for up to 16 audio channels.

Powering

The A10-RACK is powered from standard 4-pin XLR, 10-18 VDC power supplies, such as Sound Devices XL-WP4. Power supplies require 3 amps (minimum) for proper powering of the A10-RACK and connected slot receivers.

Compatible Wireless Receivers

  • Audio Ltd A10-RX, En2 CX2-P
  • Lectrosonics SRa, SRb, SRc
  • Wisycom MCR42

Please Note: Receivers are not included.

Reviews (0)

Be the first to Write a Review for this item!

Hire

Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.

Shipping

If shipping is required, we require a two day minimum hire period, with a travel day inbetween.

Cancellations

Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.

Insurance

Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

*
*
Existing Customer
*
*
Please provide your contact telephone number.
*
Please provide the name and model of the product(s) you are enquiring about hiring.
*
What is the date range that you are looking to hire this/these product(s) for?
*
Please add the two numbers