Add To Wishlist
Lectrosonics SRC + SSM Bundle: SRC Receiver + 2 x SSM TransmittersLectrosonics SRC + SSM Bundle: SRC Receiver + 2 x SSM TransmittersLectrosonics SRC + SSM Bundle: SRC Receiver + 2 x SSM TransmittersLectrosonics SRC + SSM Bundle: SRC Receiver + 2 x SSM TransmittersLectrosonics SRC + SSM Bundle: SRC Receiver + 2 x SSM TransmittersLectrosonics SRC + SSM Bundle: SRC Receiver + 2 x SSM Transmitters
Lectrosonics SRC + SSM Bundle: SRC Receiver + 2 x SSM Transmitters
Related Products

Lectrosonics SRC + SSM Bundle: SRC Receiver + 2 x SSM Transmitters

This Bundle Includes:

  • 1 x Lectrosonics SRC Dual-Channel Slot Mount ENG Receiver
  • 1 x Lectrosonics SSM Miniature Digital Hybrid Wireless Belt-Pack Transmitter

Lectrosonics SRC Dual-Channel Slot Mount ENG Receiver

The SRc is an ultra-compact dual channel receiver built into a sturdy housing with adapters for video camera receiver slots and for stand-alone use. Digital Hybrid Wireless® technology provides superb, compandor-free audio quality and compatibility with other wireless systems. The RF performance is extremely stable over a very wide temperature range, making the receiver perfectly suited to the rough environmental conditions found in field production.

DSP compatibility modes allow the receiver to be used with a variety of Lectrosonics systems, other brands of wireless systems and with Lectrosonics IFB transmitters.

Features

  • Fits camera “slots,” Lectrosonics Duopack adapter and Octopack multicoupler, and operates stand-alone with various adapters
  • Tunes over a 75 MHz range* (3 blocks)
  • Dual receiver design for two channels with phase switched diversity or single channel with ratio diversity operation
  • Digital Hybrid Wireless® with compatibility modes for use with other transmitters
  • Tracking front-end filters for high performance in tough RF environments
  • LCD with RF spectrum scanning
  • SmartSquelchTM DSP-controlled, noise based filtering and squelch
  • DSP-based pilot tone for squelch control
  • IR sync port for quick transmitter setup (LMb, LT, HHa, HMa, & SSM)
  • SmartTune operation for quick and confident frequency selection

Frequency ranges:

  • A1 - 470-537 MHz or Blocks 470, 19 & 20.
  • B1 - 537-614 MHz or Blocks 21, 22 & 23
  • B2 - 563-640 MHz or Blocks  22, 23 606 & 24
  • C1 - 614-691 MHz or Blocks 24, 25 & 26

Lectrosonics SSM Miniature Digital Hybrid Wireless Belt-Pack Transmitter

The SSM transmitter is ideal in theatrical or any other production where concealment in costuming is required. In spite of its tiny size, the transmitter offers an extensive feature set and performance on par with all of the Digital Hybrid Wireless® models.

Features

  • Tunable across three standard frequency blocks (76.8 MHz)
  • Digital Hybrid Wireless® audio for compandor-free digital quality
  • High quality 3-Pin lemo connector for microphone input
  • Selectable 25 or 50 mW RF power
  • Compatibility modes for use with analog receivers
  • 25 or 100 kHz tuning steps for up to 3072 selectable frequencies
  • Wide range input gain control in 1 dB steps
  • Quick change Lithium-ion rechargeable battery
  • Audio coupled remote control

Frequencies are selectable in 100 kHz or 25 kHz steps across a maximum tuning range of 76.7 MHz. This yields a total of 3072 available frequencies across three standard frequency blocks. The tuning range varies in other blocks to meet applicable frequency allocations.

The servo bias input accepts mic or line level signals with a wide range of gain adjustment in 1 dB steps. Accurate LED indications on the keypad allow precise gain adjustments to be made for the maximum signal to noise ratio and minimum distortion. The limiter in the preamp can cleanly handle signal peaks over 30 dB above full modulation, allowing the input gain to be set high enough to achieve the maximum signal to noise ratio, yet provide protection against input overload.

Compatibility with earlier analog Lectrosonics receivers, Lectrosonics IFB receivers and some receivers from other manufacturers is provided by DSP emulation modes selected in the LCD menu.

Frequency ranges:

  • A1 - 470-537 MHz
  • B1 - 537-614 MHz
  • B2 - 563-640 MHz
  • C1 - 614-691 MHz

SRC Specifications

Wireless Technology Analog/Digital Hybrid UHF
Number of RF Channel Frequencies 3072
Diversity Ratio Diversity, Smart Diversity
RF Bandwidth 76 MHz
Frequency Step Size 25 kHz
100 kHz
RF Channel Scanning Auto-Scan
Control App Support No
Receiver
Receiver Type Slot-Mount
Mounting Options Shoe-Mount, Slot-Mount, 1/4"-20 Female (with Optional Hardware)
Antenna 2 x Flexible Whip, SMA (Top-Mount)
Number of Audio Channels 2
Audio I/O None
Slot-Mount I/O Adapters Available Separately:
DB-25 (Uni/SuperSlot), DE-15/DB-15 (Sony Type), TA3/Mini XLR, TA5/Mini XLR
Gain Range 20 to 60 dB
Audio Output Level -50 to +5 dB (Balanced)
Frequency Response 32 Hz to 20 kHz ±1 dB
Impedance Antenna: 50 Ohms
RF Principle Double Superheterodyne
Approximate RF Sensitivity -107 dB / 1 µV
Squelch 100 dBm
Spurious Rejection: 85 dB
Power Requirements AC/DC Power Adapter, Battery, DC Input
Battery Type 2 x 9V (with Optional Equipment)
AC/DC Power Adapter 12 VDC at 3 A (Not Included)
DC Input Power 7 to 18 VDC
18 VDC at 145mA
7 VDC at 290mA
AC Input Power 100 to 240 VAC, 50 / 60 Hz
Display & Indicators 1 x LCD (Battery Status, Level, Power, RF Level, Sync, Transmitter Battery Status)
Operating Temperature -4 to 122°F / -20 to 50°C
Dimensions 2.9 x 1.2 x 4.9" / 73.7 x 30.5 x 124.5 mm
Weight 7 oz / 198 g

SSM Specifications

Frequency Selection Steps Selectable; 100 kHz steps or 25 kHz
RF Power Output Switchable; 25 or 50 mW
Pilot Tone 25 to 32 kHz; 5 kHz deviation (Digital Hybrid mode)
Frequency Stability ± 0.002%
Deviation ± 75 kHz max. (Digital Hybrid mode)
Spurious Radiation 60 dB below carrier
Equivalent Input Noise -120 dBV, A-weighted
Input Level Nominal 2 to 300 mV, before limiting
Greater than 1 V maximum, with limiting
Input Impedance Mic: 300 or 4.5 kOhms; selectable
Line: Greater than 100 kOhms
Input Limiter DSP controlled, dual envelope "soft" limiter with greater than 30 dB range
Gain Control Range 44 dB; digital control
Modulation Indicators Dual bicolor LEDs indicate modulation of -20, -10, 0 and +10 dB referenced to full modulation
Audio Performance
Frequency Response 35 Hz to 20 kHz (+/-1 dB)
Low Frequency Roll-Off -12 dB/octave; 70 Hz
Total Harmonic Distortion (THD) 0.2% (typical)
Signal to Noise Ratio* At Receiver Output:
SmartNR Off: No limiting 103.5, w/limiting 108.0
SmartNR Normal: No limiting 107.0, w/limiting 111.5
SmartNR Full: No limiting 108.5, w/limiting 113.0
Controls Side-panel membrane switches with LCD interface for power on/off and all setup and configuration controls
Responds to remote commands from smartphones with 3rd party app.
Audio Input Jack LEMO 00 series 3-pin
Antenna Galvanized steel, flexible wire
Batteries Lithium-ion 3.7 V 1000 mAH NP50 battery pack
Battery Life 6 hours per charge
Emission Standard 180KF3E
Dimensions 2.3 x 1.5 x 0.56" (58.4 x 38 x 14.2 mm)
Weight 2.3 oz (65.2 g) including lithium battery pack

*Note: The dual envelope ""soft"" limiter provides the handling of transients using variable attack and release time constants. Once activated, the limiter compresses 30+ dB of transmitter input range into 4.5 dB of receiver output range, thus reducing the measured figure for SNR without limiting by 4.5 dB

Be the first to Write a Review for this item!

Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.

Shipping

If shipping is required, we require a two day minimum hire period, with a travel day inbetween.

Cancellations

Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.

Insurance

Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

*
*
 
 
*
*
Please provide your contact telephone number.
*
Please provide the name and model of the product(s) you are enquiring about hiring.
*
What is the date range that you are looking to hire this/these product(s) for?
*
Please add the two numbers

Lectrosonics SRC + SSM Bundle: SRC Receiver + 2 x SSM Transmitters

Stock:
In stock now  

In stock now

Brand: Lectrosonics
£5,949.00(£4,957.50 Exc. VAT)(List: £6,097.00)
Extras you may be interested in (select to add)...
Lectrosonics SRC Dual Channel Receiver (Select Option)Lectrosonics SRC Dual Channel Receiver (Select Option)
Lectrosonics SSM Miniature Digital Hybrid Wireless Belt-Pack TransmitterLectrosonics SSM Miniature Digital Hybrid Wireless Belt-Pack Transmitter
Qty:  2
Key Features:
  • This bundle includes: 1 x SRC Reciever + 2 x SSM Transmitters
  • Digital Hybrid Wireless® with compatibility modes for use with other transmitters
  • Tracking front-end filters for high performance in tough RF environments
  • SmartSquelchTM DSP-controlled, noise based filtering and squelch
See More...
Get in touch!

FREE UK Delivery

When you spend over £1,000, you automatically qualify for FREE UK Delivery with our DPD courier service.

Our price promise

Found it cheaper elsewhere? Get in touch and we’ll try our best to match it.

Finance available

Finance is available upon request. Simply get in touch with our team for details.

Hire equipment

We've an extensive inventory of audio equipment for hire, with competitive rates.