Wisycom MCR54 Quad Kit With 4x MTP41s Transmitters

£6,480.00 (£5,400.00 Exc. VAT)
Out of stock
Wisycom MCR54 Quad Kit With 4x MTP41s Transmitters
Wisycom MCR54 Quad Kit With 4x MTP41s Transmitters
Wisycom MCR54 Quad Kit With 4x MTP41s Transmitters
Wisycom MCR54 Quad Kit With 4x MTP41s Transmitters

Wisycom MCR54 Quad Kit With 4x MTP41s Transmitters

£6,480.00 (£5,400.00 Exc. VAT)
B7: 470-663 MHz (Low Band 2)
B3: 510-698 MHz (Mid Band)
Out of stock
Brand: WisycomModel: MCR54 Kit With MTP41S UK Band B7
Key Features:
  • Kit Includes: 1x MCR54 4-Channel Multiband True Diversity Receiver
  • 4 x MTP41s Single Battery Beltpack Transmitter
  • 1 x BPA54 Bottom Plate, A range of antenna whips for the RX receiver
  • A pair of antenna whips for each transmitter (Band 507 & Band 590)
See More...

Wisycom MCR54 Quad Kit With 4x MTP41s Transmitters (Select Option)

This Kit Includes:

  • 1x MCR54 4-Channel Multiband True Diversity Receiver
  • 4 x MTP41s Single Battery Beltpack Transmitter
  • 1 x BPA54 Bottom Plate (1 x 4-Pin Hirose + 2 x TA5-M)
  • A range of antenna whips for the RX receiver
  • A pair of antenna whips for each transmitter (Band 507 & Band 590)

Wisycom MCR54 4-Channel Multiband True Diversity Receiver

MCR54 is a camera quadruple true diversity wireless microphone receiver system in a modular stand alone or slot in configuration. It’s compatible with most camera’s slots and “multi-slot” mixer accessories.

Multi-Band RF Tuning
Wideband just isn't enough anymore! Upgrade to a Multi-Band system with up 790 MHz tuning range to find your frequency, anywhere in the World.
High Density with NB Filters
With eight internal receiver boards, the MCR54 boasts an unprecedented capacity for range and reliability.
True-Diversity Reliability
With the combination of Narrowband Modulation and Linear transmitters, set your channels every 200kHz with-out intermodulation distortion and get an extra 3dB sensitivity.
Multi Companding
DSP delivers ENC and ENR algorithms for perfect audio in any application with less than 1ms delay – with create and shape presets for the desired sound. It enables the use of third-party transmitters with Wisycom receivers


  • Four channels True Diversity receiver (8 Receiver boards!)
  • Exceptional compactness and high robustness
  • DSP Analogue & Digital Audio Output (AES3)
  • Up to 790 MHz bandwidth in 470/1260 MHz range
  • Next Gen Multiband front-end filtering:
    • High Q electronically tunable filter in 470-800 MHz
    • 1st narrowband filter
    • 2nd narrowband filter
  • Wideband and Narrowband DSP-FM operation (SW selectable):
    • Narrowband allows more 50% band efficiency
    • Narrowband allows about 3dB extra sensitivity and noise immunity
  • Extreme low noise VCO with ultrafast spectrum scan for optimal quick & easy setup
  • High contrast OLED display
  • Automatic scan & transmitter programming through infrared and Bluetooth 5 long range
  • DSP based for extreme flexibility and multi-companding operations
  • Monitor & control through USB C or Bluetooth 5 (long range) on Wisycom Manager 2.0 (computer SW)
  • Rear antenna connectors and micro audio and power adapter

Bands Available

B1For Europe and UK market (Included in this bundle)
Tunable: 470 ÷ 800 + Fixed Band 1: 960÷1000 + Fixed Band 2: 1045÷1071 MHz
B2For Europe and USA market (Available on request)
Tunable: 470 ÷ 800 + Fixed Band 1: 823÷832 + Fixed Band 2: 940÷960 MHz (USA/EU)
B3For Japanese market (Available on request)
Tunable: 470 ÷ 800 + Fixed Band 1: 806÷809 + Fixed Band 2: 1240÷1260 MHz (JP)

Wisycom MTP40S Beltpack Transmitter

The Wisycom MTP40S Beltpack Transmitter – is an extremely small and light pocket transmitter especially designed for professional wireless microphone applications. Lavalier microphones such as the Sanken Cos-11 or DPA 4060 connect via 3-Pin Lemo.

Very easy and quick to use thanks to an OLED display, dedicated buttons and a joggle selector. The MTP40S benefits from the latest Wisycom RF technology along with enhanced robustness against noise and inter-modulation.


  • Choose Tuneable Bandwidth from 470 to 663 MHz or 510 or 698 MHz
  • Enhanced robustness against self-interference and antenna performance through a proprietary “intermodulation cancellation” circuit
  • Miniature design with flexible pcb (no connectors) for extended reliability
  • Ultra-light metal alloy body (80g without batteries)
  • User selectable multi-companding systems:
    • ENR (noise optimized)
    • ENC (voice optimized)
  • Battery: 2 AA Alkaline or rechargeable NiMH
  • Autonomy:
    • > 10 hours @ 50mW output power
    • > 14 hours @ 10mW output power
  • Infrared interface for management and firmware update
  • Easy and quick to setup through the OLED display gain/freq button and a joggle selector
  • Extended regulation on Mic input gain: 80dB in 1dB step
  • Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments
  • 48V phantom power for wired condenser microphones using the PHA48 accessory

MCR54 Specifications

Frequency ranges MCR54 B1: 470 ÷ 800 + 961÷1000 + 1045÷1075 MHz (UK)
MCR54 B2: 470 ÷ 800 + 823÷832 + 940÷960 MHz (USA/EU)
MCR54 B3: 470 ÷ 800 + 806÷809 + 1240÷1260 MHz (JP)
MCR54 B5: 470 ÷ 800 + 459÷466 + 806÷810 MHz (JP)
Switchable channels 2400 user programmable frequencies, organized in 40 groups of 60 channels
Switching-window up 790 MHz
Frequencies microprocessor controlled frequency synthesizer circuit, with 5 kHz minimum step.
The frequencies can be easily PC reprogrammed with USB C, Bluetooth 5 (long range) or optional UPKmini Programming
Frequency error < ± 2.5 ppm, in the rated temperature range
Modulation FM mono, wideband or narrowband IFB (SW selectable)
Peak deviation ±54 kHz (wideband), ± 40 kHz (narrowband)
Antenna input impedance 50 ohm sma type (SWR < 1:2; typ. 1:1.4)
Sensitivity 2 μV ( 6 dBμV), for SND/N > 58 dB;
5 μV (14 dBμV), for SND/N > 98 dB
in the whole switching-window*
Amplitude response < 0.5 dB (for RF input signal:6 dBµV ÷ 100 dBµV)
Adjacent chan. selectivity > 80 dB typical (for channel spacing ≥ 400 kHz)
Spurious emissions < 2 nW (typical = 0.1 pW)
Noise Reduction system ENR / ENR-1.2 (Wisycom Extended-NR) , noise optimized
ENC / ENC-1.2 (Wisycom Extended-NC), voice optimized & with reduced pre-emphasis
ENS (for live application)
Others, compatible with most systems, thru an internal DSP emulation of SA572, SA575 and Rms envelope compander chip set, fully user programmable
AF bandwidth 30 Hz ÷ 20 kHz (wideband), 30 Hz ÷ 17 kHz (narrowband)
Frequency response ± 1 dB in the 30 Hz ÷ 20 kHz range (wideband),
± 1 dB in the 30 Hz ÷ 17 kHz (narrowband)
Distortion 0.3 % typical
SND/D ratio (Analogue) 120 dB typical*
SND/D ratio (Digital) > 125 dB typical
Audio output Electronically balanced on 5 pin mini-XLR Female connector analogue or digital (SW selectable)
Digital sample rate AES3 @ 48 kHz
Monitor output headphone 3.5 mm jack socket
Managing interface USB C, Bluetooth 5
LEDs 2 multicolour RGB LEDs to easy indicates Power & Bluetooth
4 multicolour RGB LEDs to easy indicates the audio status of the 4 RX
Display OLED 128x64 (white)
Powering - External = 6 ÷ 18 Vdc (3 W max)
- Autonomous. = with optional BCA 54 Battery Module
Power consumption 3 Watt max (with 4 active receivers), 2 Watt max (with 2 active receivers)
Temperature range -10 ÷ +55 °C
Dimensions 104 x 85 x 25 mm (H x W x D)
Weight 230g
  *RMS value, 22 Hz / 22 kHz, unweighted

MTP41s Specifications

Frequency ranges B5 option: 470 ÷ 654 MHz
B3 option: 510 ÷ 698 MHz
B2 option: 566 ÷ 798 MHz
Switchable channels 2400 managed in 40 groups ofr 60 frequencies completely user customizable
Switching-window Up to 232 MHz, depending on band (see Variants below)
Frequencies Quartz PLL frequency synthesizer circuit (25 kHz step)
Frequency error ± 2.5 ppm, in the rated temperature range
RF Power switchable typ. 10 mW / 50 mW
note: in some countries high power can be disabled, for local norm!
Modulation wideband FM, with pre-emphasis
Nominal deviation ±40 kHz
Peak deviation ±56 kHz
Spurious emissions < 2 nW
Telemetry feature TX transmits also a digitally modulated sub-carrier, suitable for:
tone-squelch operating
remote battery monitoring
optional PTT (push to talk) operation
Noise Reduction system ENR (Wisycom Extended-NR), with independent Attack- and Recovery-time, noise optimized
ENC (Wisycom Extended-NC), with independent Attack- and Recovery-time, voice optimized & with reduced pre-emphasys
AF bandwidth 45 Hz ÷ 21 KHz (3dB)
55 Hz ÷ 20 KHz (1dB)
Distortion < 0.3 % (0.15 % typ.)
SND/D ratio (Analogue) typ. 115 dB (A)rms with 40kHz deviation
typ. 121 dB (A)rms with 56kHz deviation
Audio input connector LEMO or DPA
LEMO connector configurable on ‘mic’ display menu in 3 options:
’2 wires’: gain selectable -60 ÷ +40 (-54 dBu ÷ +26 dBu peak), no bias voltage
‘2 wires + bias’: gain selectable -60 ÷ +40 (-54 dBu ÷ + 6 dBu peak), 5.5 V on 4k7 bias supply
‘3 wires: gain selectable -60 ÷ +40 (-54 dBu ÷ +26 dBu peak)
DPA connector (2 pin microdot audio connector) configurable only
'2 wires'
'2 wires+bias'
Audio input level 100 dB adjustable range from -54 dBu (775 uV) to 46 dBu (15.5 V) at peak deviation (1 kHz), adjustable in 1 dB steps
Max input level +46 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Managing interface IrDA
LED RGB led indication with (red, green and blue) on wireless power switch:
Wireless transmission status: GREEN on/RED off
Battery lifetime status: GREEN steady (> 25%), slowly blinking (< 25%), quickly blinking (<12%)
Modulation peek (if activated & the limiter is disabled): RED
Ptt status: RED if active
Limiter into action: Blue
Battery lifetime indication 8 steps : 7 bars (100%-87%-75%-63-50%-38%-25%) and “empty bar” quickly blinking (12% remaining)
PTT function Pin 3 of the AF connector can be setup to an external push button
Display High contrast OLED (Organic light-emitting diode) white display (128 x 32 pixels)
Power supply 1 AA size cell (Alkaline, rechargeable NiMH or Lithium)
Battery life approx. 11 hours @ 50mW continuous working Lithium
approx. 8 hours @ 50mW continuous working with NiMH
approx. 4.5 hours @ 50mW continuous working with Alkaline
Temperature range -10 ÷ +55 °C
Dimensions 58.2 x 64.5 x 21.7 mm (HxWxD) with clip
Weight Approx. 80 g. without battery (120g with batt.)
Reviews (0)

Be the first to Write a Review for this item!


Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.


If shipping is required, we require a two day minimum hire period, with a travel day inbetween.


Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.


Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

Existing Customer
Please provide your contact telephone number.
Please provide the name and model of the product(s) you are enquiring about hiring.
What is the date range that you are looking to hire this/these product(s) for?
Please add the two numbers