Add To Wishlist
Wisycom MPR52 Kit With 2x Transmitters (Select Option)Wisycom MPR52 Kit With 2x Transmitters (Select Option)Wisycom MPR52 Kit With 2x Transmitters (Select Option)Wisycom MPR52 Kit With 2x Transmitters (Select Option)Wisycom MPR52 Kit With 2x Transmitters (Select Option)
Wisycom MPR52 Kit With 2x Transmitters (Select Option)
Related Products

Wisycom MPR52 Dual Channel Ultra-Wideband Receiver Bundle

The new Wisycom MPR52 Dual Channel Ultra wideband Receiver is a two channel diversity receiver with up to 790 MHz bandwidth in 470/1260 MHz range and DSP Analogue & Digital Audio Outputs (AES3).

The MPR52-ENG is a compact two channels receiver designed for professional ENG applications. The new MPR52 has two built-in diversity receivers with both analogue and digital outputs. With up to 790 MHz bandwidth in the 470/1260 MHz range, the MPR52 features next generation multi-band front-end filtering.

The software selectable wideband and narrowband DSP-FM operation gives users options based on their project needs.
Country specific Surface Acoustic Wave (SAW) filters are also available (USA: 935-960 MHz and Japan: 1240-1260 MHz).

The receiver also offers convenient function buttons, including a dedicated frequency scan option.
Battery management is flexible as it features standard battery packs that can be charged with the dedicated charger or through the micro-usb-B connector.

This also includes the MPRMNT Hot Shoe Mount and the Pinknoise Custom Receiver Output Cable (TA5F to Twin 3-Pin XLRM)

Features

  • Two-channel diversity receiver
  • DSP Analogue & Digital Audio Output (AES3)
  • Up to 790 MHz bandwidth in 470/1260 MHz range
  • Next Gen Multiband front-end filtering:
    – High Q moving filter in 470-960 MHz
    – High Q moving filter in 960-1160 MHz (DME)
    – Country specific saw filters: USA 940-960 MHz & Japan 1240-1260 MHz
  • Wideband and Narrowband DSP-FM operation (SW selectable):
    – Narrowband allows more 50% band efficiency
    – Narrowband allows about 3dB extra sensitivity and noise immunity
  • Extreme low noise VCO with ultrafast spectrum scan for optimal quick & easy setup
  • High contrast OLED display
  • Automatic scan & transmitter programming through infrared
  • DSP based for extreme flexibility and multicompanding operations
  • Miniature design with integrated battery pack:
    – rechargeable lithium pack
    – 2 x AA batteries
  • Operation and charger (lithium) thru USB connector
  • Monitor & control through USB and Wisycom Manager 2.0 (computer SW):
    – This transform MPR52 in a quick and low noise portable spectrum scanner!

MTP40S Wideband Bodypack Transmitter

The MTP40S is an extremely small and light pocket transmitter especially designed for professional wireless microphone applications. Very easy and quick to use thanks to an OLED display, dedicated buttons and a joggle selector. The MTP40S benefits from the latest Wisycom RF technology along with enhanced robustness against noise and inter-modulation.

  • Up to 232 MHz bandwidth
  • Choose between Low (470 to 663 MHz) or High (510 to 698 MHz) Band 
  • Enhanced robustness against self-interference and antenna performance through a proprietary "intermodulation cancellation" circuit
  • Miniature design with flexible pcb (no connectors) for extended reliability
  • Ultra-light metal alloy body (80g without batteries)
  • User selectable multi-companding systems:
    • ENR (noise optimized)
    • ENC (voice optimized)
  • Battery: 2 AA Alkaline or rechargeable NiMH
  • Autonomy:
    • > 7 hours @ 100mW output power
    • > 10 hours @ 50mW output power
    • > 14 hours @ 10mW output power
  • Infrared interface for management and firmware update
  • Easy and quick to setup through the OLED display gain/freq button and a joggle selector
  • Extended regulation on Mic input gain: 80dB in 1dB step
  • Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments
  • 48V phantom power for wired condenser microphones using the PHA48 accessory

MTP41S Professional Pocket UHF Transmitter

The MTP41 is an extremely small and light pocket transmitter especially designed for professional wireless microphone applications. Very easy and quick to use thanks to an OLED display, dedicated buttons and a joggle selector. The MTP41 also benefits from the latest Wisycom RF technology along with enhanced robustness against noise.

  • Up to 232 MHz bandwidth
  • Choose between Low (470 to 654 MHz) or High (510 to 698 MHz) Band 
  • Miniature design with flexible pcb (no connectors) for extended reliability
  • Ultra-light metal alloy body (60g without battery)
  • User selectable multi-companding systems:
    • ENR (noise optimized)
    • ENC (voice optimized)
  • Battery: 1 AA Alkaline or rechargeable NiMH
  • Autonomy:
    • > 5 hours @ 50mW output power
    • > 7 hours @ 10mW output power
  • Infrared interface for management and firmware update
  • Easy and quick to setup by the OLED display, gain/freq button and joggle selector
  • Extended regulation on Mic input gain: 100dB in 1dB step
  • Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments

MPR52 Specifications

Frequency ranges 470 ÷ 800 MHz, 960 ÷ 1160 MHz (DME) and
- 940 ÷ 960 MHz for B1 option or
- 1240 ÷ 1260 MHz for B2 option or
- 806 ÷ 810 MHz for B3 option
Switchable channels 2400 managed in 40 groups ofr 60 frequencies completely user customizable
Switching-window Up 790 MHz
Frequencies microprocessor controlled frequency synthesizer circuit, with 5 kHz minimum step;
frequencies is easily PC reprogrammed with USBmini interface or optional UPKmini programmer
Frequency error < ± 2.5 ppm, within the rated temperature range
Modulation FM mono, wideband or narrowband IFB (SW selectable)
Peak deviation ±54 kHz (wideband), ± 40 kHz (narrowband)
Antenna input impedance 50 ohm sma type (SWR < 1:2; typ. 1:1.4)
Sensitivity 2 μV ( 6 dBμV), for SND/N > 58 dB;
5 μV (14 dBμV), for SND/N > 98 dB
in the whole switching-window **
Amplitude response < 0.5 dB (for RF input signal:6 dBμV ÷ 100 dBμV)
Co-channel rejection > 80 dB typical (for channel spacing ≥ 400 kHz)
Spurious emissions < 2 nW (typical = 0.1 pW)
Noise Reduction system ENR / ENR-1.2 (Wisycom Extended-NR) , noise optimized
ENC / ENC-1.2 (Wisycom Extended-NC), voice optimized & with reduced pre-emphasis
+ Others, compatible with most systems, thru an internal DSP emulation of SA572, SA575 and Rms envelope
compander chip set, fully user programmable
AF bandwidth 30 Hz ÷ 20 kHz (wideband), 30 Hz ÷ 15 kHz (narrowband)
Frequency response ± 1 dB in the 30 Hz ÷ 20 kHz range (wideband),
± 1 dB in the 30 Hz ÷ 15 kHz (narrowband)
Distortion 0.3 % typical
SND/D ratio (Analogue) 100 dB typical**
SND/D ratio (AES3) > 125 dB typical
Audio output Electronically balanced on 5 pin mini-XLR Female connector
analogue or digital (SW selectable), impedance ≤ 200 ohm
Audio output level MAX +18 dBu (peak deviation), adjustable in one dB step in a range of 54 dB
Digital output AES3 @ 48 kHz
Monitor output Stereo Plug 3.5mm(TRS) Locking (M6 x 0.5 thread)
Monitor output level 2 X 100mW @ 32 Ohm
Managing interface mini USB
POWER LEDs 3 colors dedicate LED
Display OLED 128x64 (white)
Front buttons Simple operation with 4 buttons to quickly monitor and setup the receiver.
One touch function for a frequency scan and sync function.
Powering 2 x IEC-LR6 1.5V size-AA alkaline or NiMh rechargeable
- C3-V3 battery pack
- KLIC 8000 or CR-V3R lithium (i.e. DR9708 duracell)
Battery life - approx. 7 hours with MPRLBP Lithium-ion battery pack CS-KLIC8000 type
- approx. 3.5 hours with 2x AA Alkaline batteries Energizer
- approx. 4.5 hours with 2x AA NiMH 2.5Ah
Temperature range -10 ÷ + 50 °C
Dimensions 91mm x 71.5mm x 27mm (HxWxD) with clip
Weight 100 g approx. without batteries
  *RMS value, A-weighted, 22 Hz / 22 KHz

MTP40s Specifications

Frequency ranges B7 option: 470 ÷ 663 MHz
B3 option: 510 ÷ 698 MHz
B2 option: 566 ÷ 798 MHz
BP option: 806 ÷ 810 MHz
B8 option: 940 ÷ 960 MHz
B6 option: 960 ÷ 1160 MHz
Switchable channels 2400 managed in 40 groups ofr 60 frequencies completely user customizable
Switching-window Up to 232 MHz, depending on band (see Variants below)
Frequencies Quartz PLL frequency synthesizer circuit (25 kHz step)
Frequency error ± 2.5 ppm, in the rated temperature range
RF Power switchable typ. 20 mW/ 20L mW / 50 mW /100 mW
note: in some countries high power can be disabled, for local norm!
Antenna connector LEMO-F 1 pin
Modulation wideband FM, with pre-emphasis (Narrowband on request)
Nominal deviation ±40 kHz Wideband (±25 kHz Narrowband option)
Peak deviation ±56 kHz Wideband (±35 kHz Narrowband option)
Spurious emissions < 2 nW
Telemetry feature TX transmits also a digitally modulated sub-carrier, suitable for:
tone-squelch operating
remote battery monitoring
optional PTT (push to talk) operation
Noise Reduction system ENR (Wisycom Extended-NR), with independent Attack- and Recovery-time, noise optimized
ENC (Wisycom Extended-NC), with independent Attack- and Recovery-time, voice optimized & with reduced pre-emphasys
AF bandwidth 45 Hz ÷ 21 KHz (3dB), 55 Hz ÷ 20 KHz (1dB) Wideband with LPF at 20KHz
45 Hz ÷ 17 KHz (3dB), 55 Hz ÷ 15 KHz (1dB) Narrowband with LPF at 15kHz
Distortion < 0.3 % (0.15 % typ.)
SND/D ratio (Analogue) typ. 115 dB (A)rms with 40 kHz deviation typ. 121 dB (A)rms with 56 kHz deviation Wideband
typ. 115 dB (A)rms with 25 kHz deviation typ. 121 dB (A)rms with 35 kHz deviation Narrowband
Audio input connector LEMO or DPA, gain selectable -60 ÷ +40dB
LEMO connector configurable on ‘mic’ display menu in 5 options:
’2 wires’: -54 dBu ÷ +26 dBu peak, no bias voltage
‘2 wires + bias’: -54 dBu ÷ + 6 dBu peak, 5.5 V on 4k7 bias supply
‘3 wires: -54 dBu ÷ +26 dBu peak
‘2 wires & phantom’: -54 dBu ÷ +26 dBu peak
‘2 wires + bias & phantom’: -54 dBu ÷ + 6 dBu peak, 5.5 V on 4k7 bias supply
DPA connector (2 pin microdot audio connector) configurable only
'2 wires': -54 dBu ÷ +26 dBu peak, no bias voltage
'2 wires+bias': -54 dBu ÷ + 6 dBu peak, 5.5 V on 4k7 bias supply
Audio input level from -54 dBu (775 uV) to 26 dBu (15.5 V) at peak deviation (1 kHz), adjustable in 1 dB steps
Max input level +26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Managing interface IrDA
LED RGB led indication with (red, green and blue) on wireless power switch:
Wireless transmission status: GREEN on/RED off
Battery lifetime status: GREEN steady (> 25%), slowly blinking (< 25%), quickly blinking (<12%)
Modulation peek (if activated & the limiter is disabled): RED
Ptt status: RED if active
Limiter into action: Blue
Battery lifetime indication 8 steps : 7 bars (100%-87%-75%-63-50%-38%-25%) and “empty bar” quickly blinking (12% remaining)
PTT function Pin 3 of the AF connector can be setup to an external push button
Display High contrast OLED white display (128 x 32 pixels)
Power supply 2 AA size cell (Alkaline, rechargeable NiMH or Lithium)
Power consumption 250mA@ 2.6V average (display off, 100mW power)
Battery life with 2 AA alkaline
approx. 14 hours @ 10mW
approx. 10 hours @ 50mW
approx. 7 hours @ 100mW
approx. 6 hours @ 20mW Intermod Free “20L” level
Temperature range -10 ÷ +55 °C
Dimensions 73,1mm x 64,5mm x 21,6mm (HxWxD) with clip
Weight Approx. 85 g. without batteries (135g with batt.)

MTP41s Specifications

Frequency ranges B5 option: 470 ÷ 654 MHz
B3 option: 510 ÷ 698 MHz
B2 option: 566 ÷ 798 MHz
Switchable channels 2400 managed in 40 groups ofr 60 frequencies completely user customizable
Switching-window Up to 232 MHz, depending on band (see Variants below)
Frequencies Quartz PLL frequency synthesizer circuit (25 kHz step)
Frequency error ± 2.5 ppm, in the rated temperature range
RF Power switchable typ. 10 mW / 50 mW
note: in some countries high power can be disabled, for local norm!
Modulation wideband FM, with pre-emphasis
Nominal deviation ±40 kHz
Peak deviation ±56 kHz
Spurious emissions < 2 nW
Telemetry feature TX transmits also a digitally modulated sub-carrier, suitable for:
tone-squelch operating
remote battery monitoring
optional PTT (push to talk) operation
Noise Reduction system ENR (Wisycom Extended-NR), with independent Attack- and Recovery-time, noise optimized
ENC (Wisycom Extended-NC), with independent Attack- and Recovery-time, voice optimized & with reduced pre-emphasys
AF bandwidth 45 Hz ÷ 21 KHz (3dB)
55 Hz ÷ 20 KHz (1dB)
Distortion < 0.3 % (0.15 % typ.)
SND/D ratio (Analogue) typ. 115 dB (A)rms with 40kHz deviation
typ. 121 dB (A)rms with 56kHz deviation
Audio input connector LEMO or DPA
LEMO connector configurable on ‘mic’ display menu in 3 options:
’2 wires’: gain selectable -60 ÷ +40 (-54 dBu ÷ +26 dBu peak), no bias voltage
‘2 wires + bias’: gain selectable -60 ÷ +40 (-54 dBu ÷ + 6 dBu peak), 5.5 V on 4k7 bias supply
‘3 wires: gain selectable -60 ÷ +40 (-54 dBu ÷ +26 dBu peak)
DPA connector (2 pin microdot audio connector) configurable only
'2 wires'
'2 wires+bias'
Audio input level 100 dB adjustable range from -54 dBu (775 uV) to 46 dBu (15.5 V) at peak deviation (1 kHz), adjustable in 1 dB steps
Max input level +46 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Managing interface IrDA
LED RGB led indication with (red, green and blue) on wireless power switch:
Wireless transmission status: GREEN on/RED off
Battery lifetime status: GREEN steady (> 25%), slowly blinking (< 25%), quickly blinking (<12%)
Modulation peek (if activated & the limiter is disabled): RED
Ptt status: RED if active
Limiter into action: Blue
Battery lifetime indication 8 steps : 7 bars (100%-87%-75%-63-50%-38%-25%) and “empty bar” quickly blinking (12% remaining)
PTT function Pin 3 of the AF connector can be setup to an external push button
Display High contrast OLED (Organic light-emitting diode) white display (128 x 32 pixels)
Power supply 1 AA size cell (Alkaline, rechargeable NiMH or Lithium)
Battery life approx. 11 hours @ 50mW continuous working Lithium
approx. 8 hours @ 50mW continuous working with NiMH
approx. 4.5 hours @ 50mW continuous working with Alkaline
Temperature range -10 ÷ +55 °C
Dimensions 58.2 x 64.5 x 21.7 mm (HxWxD) with clip
Weight Approx. 80 g. without battery (120g with batt.)

Be the first to Write a Review for this item!

Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.

Shipping

If shipping is required, we require a two day minimum hire period, with a travel day inbetween.

Cancellations

Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.

Insurance

Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

*
*
 
 
*
*
Please provide your contact telephone number.
*
Please provide the name and model of the product(s) you are enquiring about hiring.
*
What is the date range that you are looking to hire this/these product(s) for?
*
Please add the two numbers

Wisycom MPR52 Kit With 2x Transmitters (Select Option)

Stock:
Out of stock  

Out of stock

Brand: WisycomPart Number:  MPR52 Kit With MTP40S UK Band B7


£3,540.00(£2,950.00 Exc. VAT)
Key Features:
  • Purchase the MPR52 with a choice of 2x MTP41s or 2x MTP40s
  • Available in Low Band (B7: 470 to 663 MHz) or Mid Band (B3: 510 to 698 MHz).
  • MPR52-ENG is a compact two-channel diversity receiver
  • DSP Analogue & Digital Audio Output (AES3) & Up to 790 MHz bandwidth
See More...
Get in touch!

FREE UK Delivery

When you spend over £1,000, you automatically qualify for FREE UK Delivery with our DPD courier service.

Our price promise

Found it cheaper elsewhere? Get in touch and we’ll try our best to match it.

Finance available

Finance is available upon request. Simply get in touch with our team for details.

Hire equipment

We've an extensive inventory of audio equipment for hire, with competitive rates.