Wisycom MTB40S Plug-On Transmitter

£1,249.00 (£1,040.83 Exc. VAT)

(RRP: ~~£1,255.07~~) You save: £6.07!

Out of stock

Wisycom MTB40S Plug-On Transmitter

£1,249.00 (£1,040.83 Exc. VAT)

(RRP: ~~£1,255.07~~) You save: £6.07!

FrequencyB7 (470-663 MHz)

B7 (470-663 MHz)

B3 (510-698 MHz)

B2 (566-798 MHz)

Out of stock

Brand: WisycomModel: MTB40S-B7

–

Key Features:

New white OLED display, XLR locking system and Integrated HW limiter
Up to 232 MHz bandwidth in 470/798 MHz range
Enhanced robustness against self-interferences and antenna performances
Miniature design with flexible pcb (no connectors) for extended reliability

View Video

S-WIS-MTB40S-B7

Copy URL

Information

Wisycom MTB40S Plug-On XLR Transmitter

MTB40S is an extremely small and light plug-on transmitter especially designed for professional wireless microphone applications.

MTB40S benefit of the latest Wisycom RF technology along with an enhanced robustness against noise and inter-modulation.

Improved features

New white OLED display
New XLR locking system
Integrated HW limiter

Features

Up to 232 MHz bandwidth in 470/798 MHz range
Enhanced robustness against self-interferences and antenna performances thru a proprietary “intermodulation cancellation” circuit
Miniature design with flexible pcb (no connectors) for extended reliability
User selectable companding systems: ENR (noise optimized) / ENC (voice optimized)
Input dynamic extension with an integrated HW limiter (30 dB above peak)
P48 phantom power for condenser microphones
New white OLED display (128 x 32 pixels)
New XLR-3F connector with locking collar to ensuring an extremely tight noiseless fit!
Infrared interface for management and firmware update
Audio input circuitry with high linearity audio transformer
Battery: 2 AA Alkaline or rechargeable NiMH

Specifications

Frequency Ranges	Band B5: 470 - 654 MHz Band B3: 510 - 698 MHz Band B2: 566 - 798 MHz
Switchable channels	2400 allocated by 40 groups of 60 channels (in specific frequency range), quickly selectable with dedicated buttons
Switching window	Up to 232 MHz, depending on band
Frequencies	Quartz PLL frequency synthesizer circuit (25 kHz step)
Frequency stability	± 2,5 ppm (in the rated temperature range)
Temperature range	-10 ÷ +55 °C
Max RF power	50 mW (ERP) when high power selected 10 mW (ERP) when low power selected
Spurious emissions	< 2 nW
Modulatio	n wideband FM, with 50 µs pre-emphasis
Nominal deviation	±40 kHz (Peak deviation = ±56 kHz)
Telemetry feature	MTB40S transmits also a digitally modulated sub-carrier, suitable for: Tone-squelch operating Remote battery monitoring Optional PTT (push to talk) operation
AF input connector (LEMO option)	XLR-3F (transformer isolated) with locking collar and 48V phantom power
AF input level	80 dB adjustable range from -60 dBu (775 uV) to 26 dBu (15.5 V) at peak deviation (1 kHz), adjustable in 1 dB steps
Max. input level	+26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Noise-Reduction	ENR (Wisycom Extended-NR), with independent Attack- and Recovery-time, noise optimized ENC (Wisycom Extended-NC), with independent Attack- and Recovery-time, voice optimized & with reduced pre-emphasys
AF bandwidth	45 Hz ÷ 21 KHz (3dB) 55 Hz ÷ 20 KHz (1dB)
Distortion	< 0.3 % (0.15 % typ.)
Signal-to-noise ratio	typ. 115 dB (A)rms with 40 kHz deviation typ. 121 dB (A)rms with 56 kHz deviation
Led	RGB Led indication (red, green and blue) Wireless transmission status Green when RF transmission power is on; Red when RF transmission power is off; Blue when the input signal is above the peak threshold. Modulation peak (if activated & limiter disabled): RED Battery lifetime status: GREEN - steady (> 25%) - slowly blinking (< 25%) - quickly blinking (<12%)
Display	High contrast OLED (Organic light-emitting diode) white display (128 x 32 pixels) 8 step battery lifetime indication: 7 bars (100%-87%-75%-63-50%-38%-25%) and “empty bar” quickly blinking (12% remaining)
Power supply	2 AA size batteries (Alkaline, rechargeable NiMH) – Phantom Power to Mic (max 4 mA)
Dimension	124 x 40 x 34 mm (Height-Width-Depth)
Weight	Approx. 210 g. without batteries (250g with batt)

Reviews (0)

Be the first to Write a Review for this item!

Hire

Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.

Shipping

If shipping is required, we require a two day minimum hire period, with a travel day inbetween.

Cancellations

Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.

Insurance

Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

Full Name

Existing Customer

Yes

Email Address

Contact Number

Please provide your contact telephone number.

Product(s) for Hire

Please provide the name and model of the product(s) you are enquiring about hiring.

Hire Length (Dates)

What is the date range that you are looking to hire this/these product(s) for?

Message

Please add the two numbers