Wisycom MTP40S Double Battery Transmitter

£2,091.02 (£1,742.52 Exc. VAT)

In stock now

Wisycom MTP40S Double Battery Transmitter

Wisycom MTP40S Double Battery Transmitter

£2,091.02 (£1,742.52 Exc. VAT)

FrequencyB7 (470-663 MHz)

B7 (470-663 MHz)

B3 (510-698 MHz)

In stock now

Brand: WisycomModel: MTB40S-B3

–

Key Features:

Choose Tuneable Bandwidth from 470 to 663 MHz or 510 or 698 MHz
Enhanced robustness against self-interference and antenna performance
Miniature design with flexible pcb (no connectors) for extended reliability
Ultra-light metal alloy body (80g without batteries)

View Video

S-WIS-MTP40S-B3

Copy URL

Information

Wisycom MTP40S Double Battery Transmitter (Select Option)

An extremely small and light pocket transmitter especially designed for professional wireless microphone applications. Lavalier microphones such as the Sanken Cos-11 or DPA 4060 connect via 3-Pin Lemo.

Very easy and quick to use thanks to an OLED display, dedicated buttons and a joggle selector. The MTP40S benefits from the latest Wisycom RF technology along with enhanced robustness against noise and inter-modulation.

MTP40S Features

Choose Tuneable Bandwidth from 470 to 663 MHz or 510 or 698 MHz
Enhanced robustness against self-interference and antenna performance through a proprietary “intermodulation cancellation” circuit
Miniature design with flexible pcb (no connectors) for extended reliability
Ultra-light metal alloy body (80g without batteries)
User selectable multi-companding systems:
- ENR (noise optimized)
- ENC (voice optimized)
Battery: 2 AA Alkaline or rechargeable NiMH
Autonomy:
- > 10 hours @ 50mW output power
- > 14 hours @ 10mW output power
Infrared interface for management and firmware update
Easy and quick to setup through the OLED display gain/freq button and a joggle selector
Extended regulation on Mic input gain: 80dB in 1dB step
Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments
48V phantom power for wired condenser microphones using the PHA48 accessory

Specifications

Frequency ranges	B7 option: 470 ÷ 663 MHz B3 option: 510 ÷ 698 MHz B2 option: 566 ÷ 798 MHz BP option: 806 ÷ 810 MHz B8 option: 940 ÷ 960 MHz B6 option: 960 ÷ 1160 MHz
Switchable channels	2400 managed in 40 groups ofr 60 frequencies completely user customizable
Switching-window	Up to 232 MHz, depending on band (see Variants below)
Frequencies	Quartz PLL frequency synthesizer circuit (25 kHz step)
Frequency error	± 2.5 ppm, in the rated temperature range
RF Power	switchable typ. 20 mW/ 20L mW / 50 mW /100 mW note: in some countries high power can be disabled, for local norm!
Antenna connector	LEMO-F 1 pin
Modulation	wideband FM, with pre-emphasis (Narrowband on request)
Nominal deviation	±40 kHz Wideband (±25 kHz Narrowband option)
Peak deviation	±56 kHz Wideband (±35 kHz Narrowband option)
Spurious emissions	< 2 nW
Telemetry feature	TX transmits also a digitally modulated sub-carrier, suitable for: tone-squelch operating remote battery monitoring optional PTT (push to talk) operation
Noise Reduction system	ENR (Wisycom Extended-NR), with independent Attack- and Recovery-time, noise optimized ENC (Wisycom Extended-NC), with independent Attack- and Recovery-time, voice optimized & with reduced pre-emphasys
AF bandwidth	45 Hz ÷ 21 KHz (3dB), 55 Hz ÷ 20 KHz (1dB) Wideband with LPF at 20KHz 45 Hz ÷ 17 KHz (3dB), 55 Hz ÷ 15 KHz (1dB) Narrowband with LPF at 15kHz
Distortion	< 0.3 % (0.15 % typ.)
SND/D ratio (Analogue)	typ. 115 dB (A)rms with 40 kHz deviation typ. 121 dB (A)rms with 56 kHz deviation Wideband typ. 115 dB (A)rms with 25 kHz deviation typ. 121 dB (A)rms with 35 kHz deviation Narrowband
Audio input connector	LEMO or DPA, gain selectable -60 ÷ +40dB LEMO connector configurable on ‘mic’ display menu in 5 options: ’2 wires’: -54 dBu ÷ +26 dBu peak, no bias voltage ‘2 wires + bias’: -54 dBu ÷ + 6 dBu peak, 5.5 V on 4k7 bias supply ‘3 wires: -54 dBu ÷ +26 dBu peak ‘2 wires & phantom’: -54 dBu ÷ +26 dBu peak ‘2 wires + bias & phantom’: -54 dBu ÷ + 6 dBu peak, 5.5 V on 4k7 bias supply DPA connector (2 pin microdot audio connector) configurable only '2 wires': -54 dBu ÷ +26 dBu peak, no bias voltage '2 wires+bias': -54 dBu ÷ + 6 dBu peak, 5.5 V on 4k7 bias supply
Audio input level	from -54 dBu (775 uV) to 26 dBu (15.5 V) at peak deviation (1 kHz), adjustable in 1 dB steps
Max input level	+26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Managing interface	IrDA
LED	RGB led indication with (red, green and blue) on wireless power switch: Wireless transmission status: GREEN on/RED off Battery lifetime status: GREEN steady (> 25%), slowly blinking (< 25%), quickly blinking (<12%) Modulation peek (if activated & the limiter is disabled): RED Ptt status: RED if active Limiter into action: Blue
Battery lifetime indication	8 steps : 7 bars (100%-87%-75%-63-50%-38%-25%) and “empty bar” quickly blinking (12% remaining)
PTT function	Pin 3 of the AF connector can be setup to an external push button
Display	High contrast OLED white display (128 x 32 pixels)
Power supply	2 AA size cell (Alkaline, rechargeable NiMH or Lithium)
Power consumption	250mA@ 2.6V average (display off, 100mW power)
Battery life	with 2 AA alkaline approx. 14 hours @ 10mW approx. 10 hours @ 50mW approx. 7 hours @ 100mW approx. 6 hours @ 20mW Intermod Free “20L” level
Temperature range	-10 ÷ +55 °C
Dimensions	73,1mm x 64,5mm x 21,6mm (HxWxD) with clip
Weight	Approx. 85 g. without batteries (135g with batt.)

Reviews (0)

Be the first to Write a Review for this item!

Hire

Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.

Shipping

If shipping is required, we require a two day minimum hire period, with a travel day inbetween.

Cancellations

Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.

Insurance

Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

Full Name

Existing Customer

Yes

Email Address

Contact Number

Please provide your contact telephone number.

Product(s) for Hire

Please provide the name and model of the product(s) you are enquiring about hiring.

Hire Length (Dates)

What is the date range that you are looking to hire this/these product(s) for?

Message

Please add the two numbers