DPA CORE 4099 Gooseneck Microphone - Loud SPL

£378.00 (£315.00 Exc. VAT)
In stock now
DPA CORE 4099 Gooseneck Microphone - Loud SPL
DPA CORE 4099 Gooseneck Microphone - Loud SPL
DPA CORE 4099 Gooseneck Microphone - Loud SPL

DPA CORE 4099 Gooseneck Microphone - Loud SPL

£378.00 (£315.00 Exc. VAT)
Mic Only
Universal Mount
Clamp Mount
Stand Mount
Guitar Clip
Saxophone Clip
Violin Clip
Bass Clip
Cello Clip
Stereo (Piano Clips)
Stereo (Accordion Clips)
In stock now
Brand: DPA MicrophonesModel: 4099-DC-1
+
Key Features:
  • CORE by DPA technology inside the supercardioid condenser microphone
  • Handles Extreme SPLs with superior gain-before-feedback
  • Detachable cable and a versatile gooseneck extender
  • Gooseneck length of 140mm (5.5")
See More...
S-DPA-4099-DC-1
Information

DPA CORE 4099 Gooseneck Microphone - Loud SPL (Select Option)

Features

  • CORE by DPA technology inside
  • Supercardioid condenser microphone
  • Handles Loud SPLs
  • Superior gain-before-feedback
  • Flexible and easy mounting
  • Gentle and easy to mount on the instrument
  • Detachable cable and a versatile gooseneck extender
  • Gooseneck length of 140mm (5.5")

Now with CORE by DPA technology

The d:vote™ is already the recognized standard for this type of microphone and the CORE version adds just another layer of sound quality that further distances this mic from its competitors. d:vote™ CORE 4099 brings more clarity and details to your music, across the entire dynamic range. Anyone looking for the very highest sound quality should choose CORE – every musician, live sound engineer and anyone else who takes pride in quality audio.

CORE by DPA is a powerful new technology at the heart of DPA miniature microphones. We’ve minimized distortion. From pianissimo to forte, you will experience increased clarity and openness. Learn more about CORE by DPA.

From the piano to guitar; strings to woodwinds; brass to percussion, the d:vote™ Series sounds equally impressive on them all. This one microphone model can beautifully reinforce an entire orchestra. You can move the mic to another instrument; just make sure you have the right type of clip to mount it correctly.The award-winning d:vote™ series gives you a much more natural sound than any clip-on microphone or pickup. This condenser microphone rejects unwanted noise and accurately captures the true voice of your acoustic instrument.

This microphone comes in two versions:

  • d:vote™ CORE 4099 Mic, Loud SPL (red marking on gooseneck) – used to close-mike most types of instruments
  • d:vote™ CORE 4099 Mic, Extreme SPL (yellow marking on gooseneck) – used to close-mike extremely loud instruments, such as drums and some brass

The  d:vote™ CORE 4099 also features an enhanced shock mount design, providing excellent isolation from handling noise and rumble. Detachable cables are available in heavy duty or lightweight versions, depending on the application – both are designed to withstand the rigors of daily use. A versatile, integrated gooseneck extender provides easy and repeatable mounting.

IP58 certified

All CORE by DPA technology microphones, including the d:vote™ 4099, are IP58 certified. This durability is achieved through a number of defense mechanisms:

  • Water-repellant nano-coating of the cover and housing
  • Hermetic sealing of the sensitive amplifier at the core of the mic
  • Dual gold plating of the diaphragm

The d:vote™ CORE 4099 comes with an XLR connector as an adapter. The microphone can easily be connected to a wireless system via an adapter from our extensive range of wireless adapters.

The mics can be easily unclipped and repositioned or moved to another instrument. The mounting system is designed to never blemish or scratch the finish of your instrument. The flexible design supports a wide variety of mounting and positioning possibilities.

Specifications

Specifications

Directional pattern Supercardioid
Principle of operation Pressure gradient
Cartridge type Pre-polarized condenser
Frequency response 20 Hz - 20 kHz
Effective frequency range ±2 dB, at 20 cm (7.9 in) 80 Hz - 15 kHz with 2 dB soft boost at 10-12 kHz. Second order low-cut filter at 80 Hz with DAD4099-BC
Sensitivity, nominal, ±3 dB at 1 kHz 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 23 dB(A) re. 20 μPa (max. 26 dB(A))
Distortion, THD < 1% 128 dB SPL RMS, 131 dB SPL peak
Dynamic range Typ. 109 dB
Max. SPL, THD 10% 142 dB SPL peak
Rated output impedance From MicroDot: 30 - 40 Ω. From DAD4099-BC or DAD6001-BC: 100 Ω
Cable drive capability Up to 300 m (984 ft) with DAD6001-BC/DAD4099-BC XLR Adapter
Output balance principle Signal balanced with DAD4099-BC or DAD6001-BC XLR Adapter
Common mode rejection ratio (CMRR) > 60 dB from 50 Hz to 15 kHz with DAD4099-BC or DAD6001-BC XLR Adapter
Power supply (for full performance) For wireless systems: Min. 5 V - max. 10 V through DPA adapter
With DAD6001-BC or DAD4099-BC: P48 (Phantom Power). Will work from 12 V
Current consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD4099-BC or DAD6001-BC XLR Adapter
Connector MicroDot
Color Black
Weight Microphone: 17 g (0.60 oz)
Microphone diameter 5.7 mm (0.22 in)
Microphone length 45 mm (1.8 in)
Cable length 1.8 m (5.9 ft)
Cable diameter 1.6 mm (0.06 in) / 2.2 mm (0.09 in)
Polarity +V at MicroDot pin for positive sound pressure (and pin 2 on DAD4099-BC or DAD6001-BC XLR adapter)
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%
Gooseneck length 140 mm (5.5 in)
Sensitivity selection tolerance (at 1 kHz) ±1 dB

Frequency Response

Polar Pattern

Reviews (0)

Be the first to Write a Review for this item!

Hire

Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.

Shipping

If shipping is required, we require a two day minimum hire period, with a travel day inbetween.

Cancellations

Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.

Insurance

Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

*
*
Existing Customer
*
*
Please provide your contact telephone number.
*
Please provide the name and model of the product(s) you are enquiring about hiring.
*
What is the date range that you are looking to hire this/these product(s) for?
*
Please add the two numbers