Cinela
Cinela
Microphone suspensions and windshields designed and tested to the highest scientific standards.
-1.jpg)
-1(1).jpg)
- 2 x mounting points on the suspension (allowing for easy access)
- The microphone is surrounded by air - all the way to the XLR plug
- The microphone is rigidly fixed to the cage - with external isolaters
- Available in various options for specific microphones
.jpg)
- Designed to fit the Sennheiser MKH20/30/40/50
- Unique dampening system with unbreakable cross shaped plastic isolators
- XLR connector and cabling built into the suspension
- Cradle integrated female XLR & Swivel integrated male XLR
- Offers improved wind protection for the Cinela Piano and Pianissimo windshields.
- Short Fur - Offers 12-15 dB protection in the 20-200 Hz band.
- Long Fur - Offers 16-20 dB protection at the cost of slightly increased weight
- and a tiny amount of acoustical degradation of 1-2 dB in the lowest and highest frequencies.
.jpg)
.jpg)
.jpg)
.jpg)
- Fully surrounding the windshield with a 3cm layer of large open cell foam
- Very quick fitting with Velcro fastening for easy applying
- Good wind protection in rainy conditions while being acoustically transparent
- Supplied with Nikwax spray to waterproof the regular fabric cover
-1.jpg)
-1(1).jpg)
-1(2).jpg)
-1(3).jpg)
-1(4).jpg)
-1(5).jpg)
- Easily transported, the Pianissimo is very light, robust and adaptable,
- With all the recognised qualities of the existing range of Cinela windshields.
- Aerodynamic ovoid shape and maximum internal volume for high wind resistance
- Compatible with a wide range of microphones. Short and Long fur options are available
-1.jpg)
-1(1).jpg)
-1(2).jpg)
- 2 x mounting points on the suspension (allowing for easy access)
- The microphone is surrounded by air - all the way to the XLR plug
- The microphone is rigidly fixed to the cage - with external isolaters
- Available in various options for specific microphones
-1.jpg)
-1(1).jpg)
- 2 x mounting points on the suspension (allowing for easy access)
- The microphone is surrounded by air - all the way to the XLR plug
- The microphone is rigidly fixed to the cage - with external isolaters
- Available in various options for specific microphones
--1-1.jpg)
--1-1(1).jpg)
- 2 x mounting points on the suspension (allowing for easy access)
- The microphone is surrounded by air - all the way to the XLR plug
- The microphone is rigidly fixed to the cage - with external isolaters
- Available in various options for specific microphones
.jpg)
- 2 x mounting points on the suspension (allowing for easy access)
- The microphone is surrounded by air - all the way to the XLR plug
- The microphone is rigidly fixed to the cage - with external isolaters
- The XS is designed for the Schoeps CMC1U (with or without the CUT60)
-1.jpg)
-1(1).jpg)
-1(2).jpg)
-1(3).jpg)
-1(4).jpg)
-1(5).jpg)
- Features an in-built suspension and windshield combo
- Designed for indoor / outdoor use, straight out the box!
- Internal holders are interchangable
- The holder slides into the rear of the COSI and turn to lock into place
-2-1.jpg)
-2-1(1).jpg)
-2-1(2).jpg)
- Designed for the DPA 4017B Shotgun Microphone
- The Cinela E-OSIX series is the “Elliptic” isolators version of OSIX series
- The Elliptic isolators are smaller and smarter
- Available in two strength variations: Hard grade and Soft grade
.jpg)
- Designed for the DPA 4017C Shotgun Microphone
- The Cinela E-OSIX series is the “Elliptic” isolators version of OSIX series
- The Elliptic isolators are smaller and smarter
- The Soft grade option is very good for quiet indoors with a light foam windscreen
Load More