Cinela COSI Medium Modular Windshield for Shotgun Microphones (Select Variant)

The new COSI from Cinela features an in-built suspension and windshield combo. Designed for indoor/outdoor use, straight out the box!

This windshield features a lightweight suspension suitable for a range of microphones. The windshield has medium pile length fur and is not removable. It has no other fabric or layer underneath it which provides excellent weight reduction and sound purity.

Features

• 2 x mounting points on the suspension (allowing for easy access)
• The microphone is surrounded by air - all the way to the XLR plug
• The microphone is rigidly fixed to the cage - with external isolaters
• The COSI addresses both wind protection and suspension problems faced when using microphones with short rear connectors such as CMIT, 8050, 4017C, 4018C etc
• As with any microphone suspension or windshield, the COSI requires the use of a good rumble filter (for very low-end handling noise). Typically around the 50-70 Hz area with a +18dB roll-off (3rd order filter). Many microphones are very rich in the low-end (MKH8000 or DPA with C preamp). These mics need a high slope filter for the best results in reducing handling noise.

Available Options

• 19: for Sanken CS-M1. Medium cage, 19mm holder, Short cable
• 22a: for Neumann KM184/185. Medium cage, 21.8mm holder, Short cable
• 22b: for Neumann KMA/KMD series. Medium cage, 22.1mm holder, Short cable