DPA CORE 6061 Subminiature Lavalier Microphone - Loud SPL

£438.00 (£365.00 Exc. VAT)
(RRP: £498.00) You save: £60.00!
In stock now

DPA CORE 6061 Subminiature Lavalier Microphone - Loud SPL

£438.00 (£365.00 Exc. VAT)
(RRP: £498.00) You save: £60.00!
MicroDot
3-Pin Lemo
TA5
3.5mm (Sennheiser)
In stock now
Brand: DPA MicrophonesModel: 6061-OC-U-B00
+
Key Features:
  • Amazing 3 mm CORE capsule technology
  • Renowned DPA sound in a 60% smaller package
  • Stainless steel, PVD coated mic housing
  • Modular adapter system fits most professional wireless systems
See More...
S-DPA-6061-OC-U-B00
Information

DPA CORE 6061 Subminiature Lavalier Microphone - Loud SPL (Select Option)

The new DPA d:screet 6061 Subminiature Microphone is just 3 mm (0.12 in) in size but contains the audio power of the larger range of DPA mics.

Precision engineering and miniscule optimizations of the capsule technology have created a subminiature that currently outperforms all other mics in their class. The subminiatures have the lowest noise floor compared to any other 3 mm capsule on the market and are capable of capturing high sound pressure levels without distortion.

Features

  • Amazing 3 mm CORE capsule technology
  • Renowned DPA sound in a 60% smaller package
  • Stainless steel, PVD coated mic housing
  • Modular adapter system fits most professional wireless systems

Shrinking CORE into a 3 mm

CORE by DPA is a powerful new technology at the heart of our miniature microphones. We’ve minimized distortion. From a whisper to a scream, you will experience increased clarity and openness.

Now we've taken the amazing CORE technology and shrunk it down to fit into our (0.12 in) subminiature mics. This means that, despite their small size, the performance of the d:screet™ 6060 CORE Subminiature Series is fully comparable to the 5 mm (0.20 in) miniature capsules that are beloved around the globe. These subminiatures have a lower noise floor than any other 3 mm (0.12 in) capsule on the market and they are better able to capture high sound pressure levels without distortion as well. In terms of technical specifications, the d:screet™ 6061 has a noise floor of only 26 dB(A), which is  on par with the 5 mm (0.20 in) DPA miniature capsules.

Advanced new mic design

This tiny capsule has a cap that can be removed for cleaning and should be firmly reattached to the mic body with  a firm click that can both be felt and heard. The supplied cap corresponds in its nature to the low-boost grid of the 5 mm (0.20 in) versions. Both the mic itself plus the cap are made of stainless steel and treated with a Physical vapor deposition (PVD) coating that makes it extremely durable: able to tolerate high temperatures, resilient against impacts and resistant to abrasion. The entire mic has a pleasant matte look due to the coating making the entire set-up look smaller and less obtrusive.

The cable is often the weak spot on these types of mics, so DPA have opted to use the same size cable (Ø 1.6 mm (0.06 in)) and the same rugged cable relief as on their 5 mm (0.20 in) mics. The cables are extremely durable, do not become entangled and are equipped with an inner core made of Kevlar that withstands rough pulls.

The cable and capsule design ensure immunity to noisy wireless devices. These mics are typically connected to a wireless belt pack and there is a comprehensive mix of adapters to suit the many wireless transmitters available. When used with an adapter, the connector is by default, MicroDot but there are also hardwired termination options to suit the most popular systems from manufactures such as Shure and Sennheiser. All of the available connectors are equipped with a rugged strain relief.

 It’s the only 3 mm (0.12 in) mic that gives you the DPA sonic quality that you know and love.

Specifications

Specifications

Directional pattern Omnidirectional
Principle of operation Pressure
Cartridge type Pre-polarized condenser
Frequency range 20 Hz - 20 kHz
Frequency range, ±2 dB 40 Hz - 20 kHz with 4 dB soft boost at 8 - 20 kHz
Sensitivity, nominal, ±3 dB at 1 kHz 6 mV/Pa; -34 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 26 dB(A) re. 20 μPa (max. 28 dB(A))
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) Typ. 70 dB(A)
Total harmonic distortion (THD) < 1% up to 128 dB SPL peak
Dynamic range Typ. 102 dB
Max. SPL, peak before clipping 144 dB
Output impedance From MicroDot: 30 - 40 Ω. From DAD6001-BC: 100 Ω
Cable drive capability Up to 300 m (984 ft) with DAD6001-BC XLR adapter
Power supply (for full performance) Min. 5 V to max. 10 V through DPA adapter for wireless systems. With DAD6001-BC: 48 V phantom power ±4 V for full performance. Works from 12V
Connector MicroDot
Color Black or beige
Weight 8 g (0.29 oz) incl. Cable and MicroDot connector
Microphone head size (h x w x d) 3.4 / 14.4 mm (0.13 / 0.57 in)
Capsule diameter 3 mm (0.12 in)
Cable length 1.8 m (5.9 ft)
Polarity Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%

Frequency Response

Polar Pattern

Reviews (0)

Be the first to Write a Review for this item!

Hire

Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.

Shipping

If shipping is required, we require a two day minimum hire period, with a travel day inbetween.

Cancellations

Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.

Insurance

Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

*
*
Existing Customer
*
*
Please provide your contact telephone number.
*
Please provide the name and model of the product(s) you are enquiring about hiring.
*
What is the date range that you are looking to hire this/these product(s) for?
*
Please add the two numbers