DPA MMP-E Modular Preamp w/ Active XLR Cable

£366.00 (£305.00 Exc. VAT)
Backorder Available
Contact us for lead time

DPA MMP-E Modular Preamp w/ Active XLR Cable

£366.00 (£305.00 Exc. VAT)
Rear Cable Exit
Side Cable Exit
Backorder Available
Contact us for lead time
Brand: DPA MicrophonesModel: MMP-ER
+
Key Features:
  • Can be combined with any modular capsule in the Pencil Microphones Series
  • Ultra-transparent preamp with active drive to help reject RF interference
  • Splits into a 12mm housing and a 3-Pin XLR connector at 3 meters
  • Available as a Rear Exit Cable (MMP-ER) or Side Exit Cable (MMP-ES)
See More...
S-DPA-MMP-ER
Information

DPA MMP-E Modular Preamp w/ Active XLR Cable (Select Option)

For use with hanging mics or low-profile table or instrument mics, the MMP-E Modular Active Cable Preamplifier can be combined with any modular capsule in the Pencil Microphones Series. It features a high quality preamplifier split into a 12 mm housing and a 3-pin XLR connector.

These components attach the capsule to a cable at a length of 3 meters. It is an ultra-transparent preamplifier with active drive for impedance balancing to reject frequency interference.

Available options:

  • Rear Exit Cable (MMP-ER)
  • Side Exit Cable (MMP-ES)
Specifications

Specifications

Output Connector XLR-3M, Pin 1: Shield, Pin 2: Signal + phase, Pin 3: - Phase
Low-Cut Frequency -3 dB: 15 Hz
Noise With Shorted Input, A-weighted: 0.6 µV
Output Voltage RMS: 2.2 V
Peak: 3.1 V
Type Of Electronic Circuit Active
Total Harmonic Distortion (THD) At 1VRMS, 1kHz: < 0.2 %
Dynamic Range 131 dB
Output Impedance 100 Ω
Cable Drive Capability 324' (100 m)
Minimum Load Impedance 2 kΩ
Common Mode Rejection Ratio > 40 dB
Power Supply For Full Specifications: 48 V Phantom power (± 4 V)
Current Consumption 3.5 mA
Output Balance Principle Impedance balancing
Temperature Range -40 to 113°F (-40 to 45°C)
Relative Humidity Up to 90 %
Dimensions 118 x 0.75" (3000 x 19 mm)
Weight 3.2 oz (91 g)
Reviews (0)

Be the first to Write a Review for this item!

Hire

Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.

Shipping

If shipping is required, we require a two day minimum hire period, with a travel day inbetween.

Cancellations

Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.

Insurance

Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

*
*
Existing Customer
*
*
Please provide your contact telephone number.
*
Please provide the name and model of the product(s) you are enquiring about hiring.
*
What is the date range that you are looking to hire this/these product(s) for?
*
Please add the two numbers