Wisycom MCR54 4-Channel True Diversity Receiver

£3,368.42 (£2,807.02 Exc. VAT)
In stock now
Wisycom MCR54 4-Channel True Diversity Receiver
Wisycom MCR54 4-Channel True Diversity Receiver
Wisycom MCR54 4-Channel True Diversity Receiver
Wisycom MCR54 4-Channel True Diversity Receiver
Wisycom MCR54 4-Channel True Diversity Receiver

Wisycom MCR54 4-Channel True Diversity Receiver

£3,368.42 (£2,807.02 Exc. VAT)
In stock now
Brand: WisycomModel: MCR54-B1L
Key Features:
  • Four channel true diversity receiver (8 Receiver boards!)
  • Exceptional compactness and high robustness
  • DSP Analogue & Digital Audio Output (AES3)
  • Up to 790 MHz bandwidth in 470/1260 MHz range
See More...

Please note:

Bottom plate / Rear panel is not included. Please make sure to add the item you need with your purchase. We have made this process easy by providing them as addable products above. Simply tick the box for the plate / panel you require and it will be added to the basket with the MCR54 Receiver.

Wisycom MCR54 4-Channel True Diversity Receiver

MCR54 is a camera quadruple true diversity wireless microphone receiver system in a modular stand alone or slot in configuration. It’s compatible with most camera’s slots and “multi-slot” mixer accessories.

Multi-Band RF Tuning
Wideband just isn't enough anymore! Upgrade to a Multi-Band system with up 790 MHz tuning range to find your frequency, anywhere in the World.
High Density with NB Filters
With eight internal receiver boards, the MCR54 boasts an unprecedented capacity for range and reliability.
True-Diversity Reliability
With the combination of Narrowband Modulation and Linear transmitters, set your channels every 200kHz with-out intermodulation distortion and get an extra 3dB sensitivity.
Multi Companding
DSP delivers ENC and ENR algorithms for perfect audio in any application with less than 1ms delay – with create and shape presets for the desired sound. It enables the use of third-party transmitters with Wisycom receivers


  • Four channels True Diversity receiver (8 Receiver boards!)
  • Exceptional compactness and high robustness
  • DSP Analogue & Digital Audio Output (AES3)
  • Up to 790 MHz bandwidth in 470/1260 MHz range
  • B1L Frequency Range: 470÷800 MHz (tunable) + 960÷1000 MHz + 1045÷1071 MHz (UK DME)
  • Next Gen Multiband front-end filtering:
    • High Q electronically tunable filter in 470-800 MHz
    • 1st narrowband filter
    • 2nd narrowband filter
  • Wideband and Narrowband DSP-FM operation (SW selectable):
    • Narrowband allows more 50% band efficiency
    • Narrowband allows about 3dB extra sensitivity and noise immunity
  • Extreme low noise VCO with ultrafast spectrum scan for optimal quick & easy setup
  • High contrast OLED display
  • Automatic scan & transmitter programming through infrared and Bluetooth 5 long range
  • DSP based for extreme flexibility and multi-companding operations
  • Monitor & control through USB C or Bluetooth 5 (long range) on Wisycom Manager 2.0 (computer SW)
  • Rear antenna connectors and micro audio and power adapter


Frequency ranges470 ÷ 800 + 961÷1000 + 1045÷1075 MHz (UK)
Switchable channels2400 user programmable frequencies, organized in 40 groups of 60 channels
Switching-windowup 790 MHz
Frequenciesmicroprocessor controlled frequency synthesizer circuit, with 5 kHz minimum step.
The frequencies can be easily PC reprogrammed with USB C, Bluetooth 5 (long range) or optional UPKmini Programming
Frequency error< ± 2.5 ppm, in the rated temperature range
ModulationFM mono, wideband or narrowband IFB (SW selectable)
Peak deviation±54 kHz (wideband), ± 40 kHz (narrowband)
Antenna input impedance50 ohm sma type (SWR < 1:2; typ. 1:1.4)
Sensitivity2 μV ( 6 dBμV), for SND/N > 58 dB;
5 μV (14 dBμV), for SND/N > 98 dB
in the whole switching-window*
Amplitude response< 0.5 dB (for RF input signal:6 dBµV ÷ 100 dBµV)
Adjacent chan. selectivity> 80 dB typical (for channel spacing ≥ 400 kHz)
Spurious emissions< 2 nW (typical = 0.1 pW)
Noise Reduction systemENR / ENR-1.2 (Wisycom Extended-NR) , noise optimized
ENC / ENC-1.2 (Wisycom Extended-NC), voice optimized & with reduced pre-emphasis
ENS (for live application)
Others, compatible with most systems, thru an internal DSP emulation of SA572, SA575 and Rms envelope compander chip set, fully user programmable
AF bandwidth30 Hz ÷ 20 kHz (wideband), 30 Hz ÷ 17 kHz (narrowband)
Frequency response± 1 dB in the 30 Hz ÷ 20 kHz range (wideband),
± 1 dB in the 30 Hz ÷ 17 kHz (narrowband)
Distortion0.3 % typical
SND/D ratio (Analogue)120 dB typical*
SND/D ratio (Digital)> 125 dB typical
Audio outputElectronically balanced on 5 pin mini-XLR Female connector analogue or digital (SW selectable)
Digital sample rateAES3 @ 48 kHz
Monitor outputheadphone 3.5 mm jack socket
Managing interfaceUSB C, Bluetooth 5
LEDs2 multicolour RGB LEDs to easy indicates Power & Bluetooth
4 multicolour RGB LEDs to easy indicates the audio status of the 4 RX
DisplayOLED 128x64 (white)
Powering- External = 6 ÷ 18 Vdc (3 W max)
- Autonomous. = with optional BCA 54 Battery Module
Power consumption3 Watt max (with 4 active receivers), 2 Watt max (with 2 active receivers)
Temperature range-10 ÷ +55 °C
Dimensions104 x 85 x 25 mm (H x W x D)
 *RMS value, 22 Hz / 22 kHz, unweighted
Reviews (0)

Be the first to Write a Review for this item!


Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.


If shipping is required, we require a two day minimum hire period, with a travel day inbetween.


Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.


Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

Existing Customer
Please provide your contact telephone number.
Please provide the name and model of the product(s) you are enquiring about hiring.
What is the date range that you are looking to hire this/these product(s) for?
Please add the two numbers