Zaxcom URX100 Multipurpose UHF Receiver / IFB Receiver

£1,140.00 (£950.00 Exc. VAT)
In stock now
Zaxcom URX100 Multipurpose UHF Receiver / IFB Receiver
Zaxcom URX100 Multipurpose UHF Receiver / IFB Receiver

Zaxcom URX100 Multipurpose UHF Receiver / IFB Receiver

£1,140.00 (£950.00 Exc. VAT)
In stock now
Brand: ZaxcomModel: URX100
+
Key Features:
  • Can be configured as a camera link receiver
  • Or an IFB receiver with walkie talkie interface
  • Or as a standalone IFB receiver with timecode view and delay
  • Compatible with any Zaxcom Digital Recording Wireless transmitter
See More...
S-ZAX-URX100
Information

Zaxcom URX100 Multipurpose UHF Receiver / IFB Receiver

The URX100 is a multipurpose UHF receiver that can be configured as a camera link receiver, an IFB receiver with walkie talkie interface or a standalone IFB receiver with timecode view and delay.

Connectivity

The URX100 is compatible with any Zaxcom Digital Recording Wireless transmitter. The UHF diversity receiver utilizes a tunable tracking front end filter to combat interference and extend range. Two antennas (one internal, one external) provide dropout resistance. Operating distances can exceed 500 feet (152 m).

As a Camera Link

It features two modes of operation: stereo audio output or mono audio output with SMPTE timecode. Stereo audio or balanced mono audio is output from the 3.5mm headphone jack. SMTPE timecode and mono unbalanced audio is output from the auxiliary TA5 connector.

Walkie Talkie Interface with Optional URXL1 Lanyard

The URX100 can be connected to the remote speaker/mic port of a walkie talkie. You can route the walkie talkie audio left, right or center by the URX100 and/or mix the walkie audio with the URX100 receiver audio. Both the URX100 and walkie talkie audio to be heard at the same time with a single pair of headphones when using the URXL1 Lanyard.

The URXL1 Lanyard has a push-to-talk button and a microphone. Volume control is adjustable. Any headphone with a 3.5mm jack can be plugged into the URXL1 Lanyard. The URXL1 Lanyard is optional.

IFB Receiver

Menu options include mono or stereo audio and view timecode on the OLED display. Up to six frames of programmable delay allow for video sync.

Paired with the URXL1 lanyard both the IFB audio and walkie talkie audio can be listened to. Talk back is through the built-in URXL1 microphone. Volume is adjustable.

The URX100 can monitor a stereo signal or route the audio to left, right and both ears as a mono mix. The stereo signal can be selected at the URX100 so that a boom operator can monitor one of two transmitted channels that can include a public IFB feed as well as a private communication channel. This monitored audio can also be combined with the audio from a connected walkie with left, right or center routing.

Remote Control

A browser based remote control interface lets the URX100’s to be programmed remotely.

Power

3-AA lithium batteries provides up to 10 hours of runtime. Alkaline lasts up to 8 hours.

Specifications

Specifications

Receiver
Receiver Channels1
Diversity methodantenna switching
RF Modulationproprietary digital method
RF Frequency Range512 to 698 MHz
RF Frequency Step100 KHz
RF Signal Bandwidth200 KHz
Channel Separation500 KHz (700 KHz recommended)
Sensitivity-114 dBm
Antenna Connector50-ohm SMA female
Receiver Audio – Analog Output
Dynamic Range110 dB
Distortion0.002%
Frequency Range20Hz to 16kHz
DAC Bit-depth24 bits
ConnectorTA-5M
Audio Output
Impedance16 ohms
Output Power100 mW
Output TypeHeadphone driver
Output connector3.5 mm
Mode2-Channel unbalanced or 1-Channel balanced
Max Output Level+12 dBm
Timecode
Timecode output connectorTA5 Male
Timecode output level.01VPP – 3VPP Variable
Time code output rate23.98, 24, 25, 29.97 ND, 29.97 DF, 30
TA5 Auxiliary Connector
Available FunctionsTimecode output, Left audio out, Walkie Microphone out, Walkie Audio return
Power
Internal Power3 AA Batteries
Li-Ion Battery LifeUp to 11 hours
NiMH Battery LifeUp to 9 hours
Alkaline Battery lifeUp to 7 hours
*these times are approximate*
Misc.
Weight4.5 oz without batteries
Dimensions4.1” x 2.5” x .9”
DisplayGraphic OLED Panel
Reviews (0)

Be the first to Write a Review for this item!

Hire

Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.

Shipping

If shipping is required, we require a two day minimum hire period, with a travel day inbetween.

Cancellations

Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.

Insurance

Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

*
*
Existing Customer
*
*
Please provide your contact telephone number.
*
Please provide the name and model of the product(s) you are enquiring about hiring.
*
What is the date range that you are looking to hire this/these product(s) for?
*
Please add the two numbers