Zaxcom RX200 Wideband 2-Channel ENG Receiver
The RX200 is a 200 MHz wide-band, compact, battery powered ENG receiver. It has a tunable tracking front end filter for receiving any frequency in any block from 20 through 26, or 512 – 698 MHz, all while still filtering out unwanted RF.
Features
- Flexibility From Afar: RX200 has an automatic tracking front end filter so you can receive on any frequency in any block from 20 through 27 (512-698MHz) with impressive range
- Self Sufficient: The ultra compact RX200 isn't only small, but powers itself on 4 internal AA batteries for up to 12 hours for use with any camera big or small
- Going All Out: Output AES digital or analog audio via a single TA5 connector and timecode from a dedicated BNC connector
RX200 can output AES digital audio or analog audio at -35dB mic level, -10dB consumer level, or 0dB line level on a single TA5 connector. It’s also capable of receiving and outputting the embedded SMPTE timecode on a BNC connector also on mic, line or consumer levels, so no matter what the camera is all bases are covered.
Channel Count
The RX200 receives up to two channels of audio from one transmitter. You can use it with any UHF transmitter we make, but it’s most often paired with our TRXCL3 since it’s so small and light and has dedicated audio and timecode outputs. Gotta keep those camera guys happy… or at least not disliking you for making their camera heavier than it already is
RF Performance
As mentioned above, the RX200 has an automatic tracking front end filter, so you can receive on any frequency in any block from 20 through 26 (512-698MHz) with impressive range. Here’s how that works – the filter allows signals within the 35 MHz tunable window into the receiver while blocking the interfering high-level signals outside this window. The nerds call this desensing. We let the good stuff in (your radio mic transmitters) and we keep the bad stuff out (walkie talkies, the follow focus, etc.). Think of it like the bouncer outside a nightclub.
Half of your Camera Link
The RX200 / TRXCL3 Camera Link combo is a great solution for sending two channels of 100% digital audio with embedded SMPTE timecode from bag to camera. Small and light-weight with Zaxcom’s patented side-mounted LED’s, the RX200 is easy to mount on any camera – from small format DSLR to a full size rig.
Power
The ultra compact RX200 is not only small, but incredibly flexible – it can be powered from an external power source or internally via 4 x AA batteries for up to 12 hours so you can use this with any camera big or small. To top it off it’s extremely power efficient drawing only 140 mA @ 12 VDC.
Frequency Range
The RX200 is wide-band and covers all frequency blocks from 20 through 26 (512-698 MHz).
Hire Equipment
We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.
Weekly Rental
For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.
Shipping
If shipping is required, we require a two day minimum hire period, with a travel day inbetween.
Cancellations
Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.
Insurance
Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".
