1 x 4017C w/ Compact Preamp
1 x Foam Windscreen
1 x Microphone clip
1 x Hardshell zipper case
DPA 4017C Compact Shotgun Microphone w/ Compact Preamp
Designed for a broad range of applications, the 4017 Shotgun Mic is ideal for use with camera systems, in fixed positions at sports facilities, for broadcast / ENG / film booming and even studio recording environments.
This condenser microphone capsule is part of the flexible pencil microphones. It is equipped with a highly-directional hypercardioid pickup pattern; obtained using a supercardioid design with an interference tube that provides excellent off-axis rejection.
Features
- Small and lightweight
- Excellent RF immunity
- Highly immune to humidity
- Uniform off-axis response
- Highly directional pattern
- Sleek shotgun for distant miking
- Integrated active cable
The 4017C Compact Shotgun Mic comes in at just 154 mm (6.1 in) and 70 g (2.5 oz), this mic sets new standards for compactness within shotgun microphones and their applications. At the same time, it offers impressive accuracy, clarity and musicality.
The mic is immune to RF emission and the 19 mm (0.75 in) condenser cartridge is capable of handling peak SPLs of 152 dB before clipping. It withstands use in very humid environments with ease. It delivers clear sound even when used in very hot or cold areas of the world such as the desert and the arctic.
Specifications
Directional pattern | Supercardioid, lobe-shaped |
Principle of operation | Pressure gradient, with interference tube |
Cartridge type | Pre-polarized condenser |
Frequency range | 20 Hz - 20 kHz |
Frequency range, ± 2 dB, at 60 cm | 40 Hz - 18 kHz with typ. 3 dB soft boost at 15 kHz |
Sensitivity, nominal, ± 2 dB at 1 kHz | 19 mV/Pa; -34.4 dB re. 1 V/Pa |
Equivalent noise level, A-weighted | Typ. 13 dB(A) re. 20 µPa (max. 15 dB(A)) |
Equivalent noise level, ITU-R BS.468-4 | Typ. 24 dB (max. 26 dB) |
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) | Typ. 81 dB(A) |
Total Harmonic Distortion (THD) | < 1 % up to 133 dB SPL peak |
Dynamic range | Typ. 120 dB |
Max. SPL, peak before clipping | 146 dB |
Output impedance | 100 Ω |
Minimum load impedance | 2 kΩ |
Cable drive capability | 100 m (328 ft) |
Output balance principle | Impedance balancing with Active Drive |
Common Mode Rejection Ratio (CMRR) | > 40 dB |
Power consumption | 48 V Phantom power (± 4 V) |
Current consumption | 2.8 mA |
Connector | XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase |
Color | Matte black |
Weight | 70 g (2.5 oz) |
Microphone diameter | 19 mm (0.75 in) |
Capsule diameter | 19 mm (0.75 in) |
Microphone length | 154 mm (6.1 in) |
Output voltage, RMS | 4.5V |
Polarity | +V at pin 2 for positive sound pressure |
Temperature range | -40 °C to 45 °C (-40 °F to 113 °F) |
Relative Humidity (RH) | Up to 90% |
Frequency Response
Typical on and off-axis response of a 4017C Shotgun microphone measured at 60cm (23.6in)
Polar Pattern
Typical directional characteristics of a 4017C Shotgun Microphone
Hire Equipment
We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.
Weekly Rental
For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.
Shipping
If shipping is required, we require a two day minimum hire period, with a travel day inbetween.
Cancellations
Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.
Insurance
Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".