1 x CUB-01 Pigtail Microphone
2 x Rubber Bases
1 x Foam Windscreen
1 x Protective Vinyl Case
Sanken CUB-01 Pigtail Boundary Microphone (Grey)
Offers a totally new design‐ a Sanken original ‐ which overcomes the limitations of previous boundary microphones, producing an extremely rich and full bodied sound in a much smaller package. Although very small (1.26″ diameter, .5″ tall), and weighing only 1.6oz., the sound is superior to much larger boundary types.
Features
- Clear and rich sound
- Small and easy to conceal unlike other boundary mics
- Wide 60Hz-16kHz frequency response
- Sound energy in the high frequencies is identical with the mid and lows
- Perfect for TV and film field shooting, broadcast studio production and conference table recording
- New Sanken design that overcomes the limitations of previous boundary microphones
- Available in Gray or Beige
- Available with XLR3 connector or Pigtail
The CUB‐01 is designed for use in many situations like film and televison production on set or on location, in a conference room, or on a podium. Especially effective in an automobile, this microphone has become a favorite for production professionals.
Most boundary microphones have almost the same sound characteristics, heard as “thin,” “solid,” and “metallic.” Using Sanken’s advanced technology, the CUB-01 has resolved this problem with its unique square-shaped cardioid capsule. This proprietary design significantly enlarges the effective area of the diaphragm, resulting in a boundary microphone whose sound is rich and natural, with a flat response to 70Hz.
A Totally New Concept in Cardioid Boundary Microphones
With the CUB-01 it is now possible to capture a full bodied and clear sound. Narration and dialogue are clearly caught while excluding unnecessary background noise. Sanken’s revolutionary design has also eliminated the artificial need to overdesign the acoustic construction to create cardioid directivity.
Engineered for use in many situations, from TV and film field shooting to broadcast studio production and conference table recording, the CUB-01 departs from the common design of the boundary mic, which typically requires a large, heavy plate. By comparison, the CUB-01 is unbelievably small (32mm diameter, 12mm height, 45g weight) and light.
Because of its size, it is easy to conceal from the camera, and can be positioned in a variety of environments – for example, attached to the ceiling of a car with two-sided sticky tape. The CUB-01 is available in gray or beige and in two versions – the standard high performance CUB-01 which runs on 48 volt phantom and the CUB-01-PT (pigtail) version. The PT version will operate on 3 to 10 VDC for wireless applications.
Specifications
| Model Name | CUB-01-PT Pigtail |
| Transducer | Back electret condenser |
| Directivity | Cardioid/front side of hemisphere |
| Frequency response | 60Hz – 15kHz |
| Sensitivity (at 1kHz) | 3V power supplied: 15mV(-36.5dB±2dB)/Pa (0dB=1V/Pa)
12V power supplied: 16.8mV(-35.5dB±2dB)/Pa (0dB=1V/Pa) |
| Equivalent noise level (A weighted) | (at 3V): 17dB(A-weighted) IEC 179
(at 12V): 16dB(A-weighted) IEC 179 |
| Max SPL | 3V power supplied: 121 dB SPL (THD 1%, 1kHz)
12V power supplied: 127 dB SPL (THD 1%, 1kHz) |
| Output impedance( 1kHz ) | 120Ω (1kHz), expected receive side impedance 5k Ω |
| Powering | 3V to 14V(MAX) DC |
| Current consumption | 3V power supplied: 0.6mA
12V power supplied: 1.3mA |
| Weight | 45g (1.6oz) (microphone)
55g (1.9oz) (Phantom I/F Part) |
| Dimensions | Microphone; D: 32.5mm, H: 14mm (1.3″x0.55″) |
| Surface finish | Metal Mesh – woven wire cloth
Base – Copper
Fired Painted |
| Connector | Pig-tail: Cable direct out;
hot(signal)white
+DC voltage in:black
shield:ground |
Dimensions
Please note: XLR barrel not included with the Pigtail model.
Hire Equipment
We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.
Weekly Rental
For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.
Shipping
If shipping is required, we require a two day minimum hire period, with a travel day inbetween.
Cancellations
Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.
Insurance
Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".
