Cedar DNS-4 Portable 4 Channel Dialogue Noise Suppressor

CALL FOR PRICE (£0.00 Exc. VAT)
Backorder Available
Contact us for lead time
Cedar DNS-4 Portable 4 Channel Dialogue Noise Suppressor
Cedar DNS-4 Portable 4 Channel Dialogue Noise Suppressor
Cedar DNS-4 Portable 4 Channel Dialogue Noise Suppressor

Cedar DNS-4 Portable 4 Channel Dialogue Noise Suppressor

CALL FOR PRICE (£0.00 Exc. VAT)
Backorder Available
Contact us for lead time
Brand: CedarModel: DNS 4
+
Key Features:
  • Four channels of state-of-the-art noise suppression
  • High-resolution 40-bit floating-point processing
  • Near-zero latency to ensure that there's no loss of lip-sync
  • Super-fast setup and control. Small, light and eminently portable
See More...
S-CED-DNS-4
Information

Please note:

We are unable to sell this product outside of the United Kingdom. Please contact our sales team for more information

Cedar DNS-4 Portable 4 Channel Dialogue Noise Suppressor

The DNS 4 is the most advanced portable model in the DNS series. With its Hirose HR-10 power input and mini-XLRs for many connections, it takes up little more space than the industry-standard DNS 2 yet doubles the number of channels available.

Features

  • Four channels of state-of-the-art noise suppression
  • High-resolution 40-bit floating-point processing
  • Near-zero latency to ensure that there's no loss of lip-sync
  • Super-fast setup and control
  • It's small, light and eminently portable
  • It runs on 12V power

It's incredibly fast and simple to use; the DNS algorithm requires nothing more than switching on the Learn function that identifies and adapts to the background noise, and then adjusting the amount of noise attenuation required. Notwithstanding this simplicity, it can achieve remarkable results. What's more, despite being so convenient that you can slip it into your pocket or equipment bag, it offers analogue line and ultra low-noise microphone inputs (the latter with optional 48V phantom powering), AES3/AES11 digital inputs, and both analogue and digital outputs. And, to increase its flexibility still further, it runs on 12V power so you can use it in the middle of a field as easily as in the studio or edit suite.

Retaining the near-zero latency of its predecessors, the DNS 4 is suitable for use in all situations - location recording, live-to-air broadcasting and live sound in venues such as theatres, concert halls, conferences venues and places of worship, as well as in the studio.

The dialogue noise suppressors that everyone uses everywhere

CEDAR's dialogue noise suppression (DNS) technology is used on the highest quality productions and broadcasts to eliminate traffic noise, air conditioning, wind, rain, babble and general background noise from audio. It will help to compensate for unfavourable acoustic conditions and poor microphone placement, and will even suppress excessive reverberation.

It's used to clean up sound for film production, to suppress ambient noise for live broadcasting, to refresh sound libraries, and to enhance speech for audio forensic investigations. It's an industry standard that has earned a string of awards including an Emmy®, an Academy Award®, an IABM Award® and two Cinema Audio Society Awards.

Specifications

Specifications

Line inputs
Connectors Channels 1&2: Balanced XLR3F
Channels 3&4: Balanced TA3 mini-XLR
Impedance 10kΩ
Nominal signal level (0dB gain) +4dBu
ADC line up (0dB gain) +4dBu: -20dBFS
Clipping level (0dB gain) +24dBu
Dynamic range (0dB gain) >102dB (AES17 unweighted)
Gain ranges Channels 1&2: -6dB to +54dB
Channels 3&4: 0dB to +20dB
Microphone inputs with ultra low-noise microphone preamplifiers
Connector Balanced XLR3F
Impedance 2kΩ
Gain range 18dB to 78dB
ADC line up (36dB gain) -32dBu: -20dBFS
Dynamic range (36dB gain) >102dB (AES17 unweighted)
Phantom Power
Type P48 (IEC61958)
Unloaded voltage +48V ± 4V
Current available 10mA per microphone
Short circuit protection Indefinite
AD/DA conversion
Format 24-bit linear PCM
Sample rate (internal sync.) 48kHz
Sample rate (external sync.) 40kHz – 100kHz
Digital inputs
Connector Balanced TA3 mini-XLR
Format AES3 (IEC60958) or AES11 (DARS)
Sample rate sync range 40kHz - 100kHz
Line outputs
Connector Balanced TA3 mini-XLR
Nominal signal level +4dBu
DAC line up -20dBFS: +4dBu
Maximum output +24dBu
Dynamic range 96dB
Minimum load impedance 600Ω
Short circuit protection Indefinite
Digital outputs
Connector Balanced TA3 mini-XLR
Format AES3 (IEC60958)
Sample rate (internal sync) 48kHz (±50ppm)
Sample rate (external sync) Locked to digital input
DSP
Type Floating point
Resolution 40-bit
Sample rates 44.1kHz, 48kHz, 96kHz
Power input
Voltage 8V to 17.5V (nominal 12V)
Connector Hirose 4-pin HR10 (pin1 -, pin4 +)
Reverse polarity protection Indefinite
Over-voltage protection Indefinite, up to 50V
Max power consumption @ 12V 15W
Power adapter
Input voltage 85VAC - 260VAC, 50 - 60Hz
Input power 15W
Input connector UK/US/EU
Output voltage 12V
Output connector Hirose 4-pin HR10 (pin1 -, pin4 +)
Physical
Dimensions 185 x 130 x 45 mm
Weight 750g
Reviews (0)

Be the first to Write a Review for this item!

Hire

Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.

Shipping

If shipping is required, we require a two day minimum hire period, with a travel day inbetween.

Cancellations

Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.

Insurance

Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

*
*
Existing Customer
*
*
Please provide your contact telephone number.
*
Please provide the name and model of the product(s) you are enquiring about hiring.
*
What is the date range that you are looking to hire this/these product(s) for?
*
Please add the two numbers