Schoeps CMIT 5 Shotgun Microphone

£1,875.00 (£1,562.50 Exc. VAT)
(RRP: £2,031.60) You save: £156.60!
In stock now
Schoeps CMIT 5 Shotgun Microphone
Schoeps CMIT 5 Shotgun Microphone
Schoeps CMIT 5 Shotgun Microphone
Schoeps CMIT 5 Shotgun Microphone
Schoeps CMIT 5 Shotgun Microphone
Schoeps CMIT 5 Shotgun Microphone

Schoeps CMIT 5 Shotgun Microphone

£1,875.00 (£1,562.50 Exc. VAT)
(RRP: £2,031.60) You save: £156.60!
In stock now
Brand: SchoepsModel: CMIT 5
+
Key Features:
  • Unusually low coloration of off-axis sound
  • Suitable for music recording as well as dialogue
  • Rotationally symmetrical polar pattern
  • Even greater immunity to wind noise than a SCHOEPS supercardoid
See More...
S-SCH-CMIT-5
Information

Schoeps CMIT 5U Shotgun Microphone

The CMIT 5 is SCHOEPS' shotgun microphone which has set a new standard for shotgun microphones since its release. The CMIT 5's directionality increases smoothly with higher frequencies, which results in a very balanced sonic character. In addition to this, the microphone's sound level decreases softly yet steadily for off-axis sounds, allowing these to be recorded neutrally as well as reducing the effects of movement during boom operation. The CMIT 5 also has a much stronger directionality than one might expect from a microphone of its length. If required, the CMIT 5 can also be used for music recordings, for example opera recordings.

Features

  • Unusually low coloration of off-axis sound
  • Suitable for music recording as well as dialogue
  • Rotationally symmetrical polar pattern
  • Even greater immunity to wind noise than a SCHOEPS supercardoid
  • Very lightweight, robust all-metal housing

The sound quality of the CMIT 5 remains consistent even if the microphone is rotated on its axis, since its directional pattern is the same in both the vertical and horizontal planes.

Three pushbutton-activated filters allow the microphone to adapt to the recording situation:
  • High-frequency emphasis (+ 5 dB at 10 kHz) enhances speech intelligibility, and compensates for high-frequency loss caused by windscreens.
  • A steep low-cut filter (18 dB/oct. below 80 Hz) suppresses wind and boom noise.
  • A gentle low-frequency rolloff (6 dB/oct. below 300 Hz) compensates for proximity effect.

Pairs of LEDs next to each pushbutton indicate the status of the filters. Even in darkness the user can read the settings and see that the microphone is operational. The settings are retained when the microphone is switched off.

The capsule and amplifier of the CMIT 5 U are built as a single unit, unlike microphones of the SCHOEPS ”Colette” series.

Specifications

Specifications

Frequency range 40 Hz - 20 kHz
Sensitivity 17 mV/Pa
Equivalent noise level (A-weighted) 14 dB-A
Equivalent noise level (CCIR) 24 dB
Maximum sound pressure level at 0.5% THD 132 dB-SPL
Powering voltage 48 V
Current consumption 4.4 mA
Maximum output voltage 1.3 V
Impedance 50 Ω
Minimum recommended load impedance 600 Ω
Length 251 mm
Diameter 21 mm
Weight 89 g
Reviews (0)

Be the first to Write a Review for this item!

Hire

Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.

Shipping

If shipping is required, we require a two day minimum hire period, with a travel day inbetween.

Cancellations

Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.

Insurance

Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

*
*
Existing Customer
*
*
Please provide your contact telephone number.
*
Please provide the name and model of the product(s) you are enquiring about hiring.
*
What is the date range that you are looking to hire this/these product(s) for?
*
Please add the two numbers