Zaxcom TRXCL4 Digital Camera Link Transmitter

£2,874.00 (£2,395.00 Exc. VAT)
Backorder Available
Contact us for lead time
Zaxcom TRXCL4 Digital Camera Link Transmitter
Zaxcom TRXCL4 Digital Camera Link Transmitter
Zaxcom TRXCL4 Digital Camera Link Transmitter
Zaxcom TRXCL4 Digital Camera Link Transmitter

Zaxcom TRXCL4 Digital Camera Link Transmitter

£2,874.00 (£2,395.00 Exc. VAT)
“.5 band” (512-614 MHz)
“.6 band” (596-698 MHz)
Backorder Available
Contact us for lead time
Brand: ZaxcomModel: TRXCL4.5
+
Key Features:
  • Deliver pristine audio quality with the TRXCL4
  • A wide-band camera link transmitter for sound professionals
  • Weighing 7.3 oz, it’s constructed from an impact-resistant metal casing
  • A bright OLED display provides easy menu navigation
See More...
S-ZAX-TRXCL45
Information

Zaxcom TRXCL4 Digital Camera Link Transmitter (Select Option)

Design Matters

Deliver pristine audio quality with the TRXCL4 wide-band camera link transmitter for sound professionals in film, television, or ENG applications.

Weighing 7.3 oz, it’s constructed from an impact-resistant metal casing that’s cool to the touch. A bright OLED display provides easy menu navigation.

Connectivity

The TRXCL4 sends audio with embedded timecode to camera via a UHF signal to any Zaxcom receiver – QRX200, RX200, QRX235 or MRX/RX-4. It can also send audio and timecode via ZaxNet’s 2.4 GHz signal to an ERX3TCD receiver, or remote control commands to any Zaxcom digital recording wireless transmitter.

A TA5 audio input offers balanced stereo line level or sample rate converting AES. The BNC connector provides timecode in.

New on the CL4 is an RS422 port for direct connection to the Zaxom GUI Bridge so you can easily setup URX50/100 and remote control your wireless via any device that can access the internet.

ENCRYPTED AUDIO

The TRXCL4 transmits using 100% digital modulation and audio is fully encrypted to keep recordings private.

Internal Recording

Audio can be simultaneously transmitted and internally recorded to a microSD card using MARF (Mobile Audio Recording Format) which eliminates file corruption common to recordings due to loss of power or early card removal.

BETTER WORKFLOW

The TRXCL4 is designed to limit intermodulation which can occur when multiple transmitters are in close proximity to each other and mix together.

ADVANCED FEATURES

ZaxNet allows you to send scratch track audio, timecode, and remote control commands.

Frequency Choices:

  • “.5 band” (512-614 MHz)
  • “.6 band” (596-698 MHz)

Zaxcom Digital Recording Wireless Transmitters are protected under patent #’s: 7,711,443 & 7,929,902

Specifications

Specifications

Transmitter
RF Modulation Proprietary Digital Method
TRXCL4.5 RF Frequency Range 512 – 614 MHz
TRXCL4.6 RF Frequency Range 596 – 698 MHz
RF Frequency Step 100 KHz
RF Bandwidth in ZHD Mode 50 KHz
RF Bandwidth 200 KHz
Channel Separation in XR Mode 400 KHz
Antenna Connector 50 Ω SMA Female
Emission Designator 180 KV2E
FCC Part 74.861
Transmitter Audio
Dynamic Range 114 dB
Distortion 0.002%
Frequency Response Mode 0 is 20 Hz to 16 kHz / T & M Mode is 0.2 Hz to 16 kHz
System Group Delay 3.5 ms
Audio input connector TA5 male
Analog Input Range -10 to +4 dBu
Analog input type balanced line level
Audio input Impedance 4.7 k Ω
ADC Bit-Depth 24 Bits
ADC Sampling-Rate 48 kHz
AES input Balanced with sample rate conversion
Sample rate range 32 Khz to 96 Khz
Timecode Reader / Generator
Clock Accuracy 1.54 PPM (1 Frame Out in 6 Hours)
Timecode Type SMPTE
Timecode Frame-Rates 23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF
Internal Recording
Media MicroSD Card (Flash Memory)
File Format .ZAX
Recording Time 96 Hours (16 GB Card)
2.4 GHz ZaxNet Transmitter
RF Frequency Range 2.403 to 2.475 GHz
RF Modulation Digital Spread Spectrum
RF Frequency Step 0.001 GHz (1 MHz)
RF Bandwidth 1 MHz
Channel Separation 2 MHz
Sensitivity -96 dBm
RF power output 100 mW max
Physical / Power
Weight 7.3 oz
Dimensions (H x W x D) 1”x 3.55” x 3.23”
Display Graphic OLED
Power Output 25 / 50 / 100 mW – Software Selectable
Power consumption 2.13 watts
*Power measured pre-output band pass filter  
Reviews (0)

Be the first to Write a Review for this item!

Hire

Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.

Shipping

If shipping is required, we require a two day minimum hire period, with a travel day inbetween.

Cancellations

Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.

Insurance

Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

*
*
Existing Customer
*
*
Please provide your contact telephone number.
*
Please provide the name and model of the product(s) you are enquiring about hiring.
*
What is the date range that you are looking to hire this/these product(s) for?
*
Please add the two numbers