Zaxcom ZFR300NC Miniature Bodypack Recorder w/ NeverClip

£1,434.00 (£1,195.00 Exc. VAT)
In stock now
Zaxcom ZFR300NC Miniature Bodypack Recorder w/ NeverClip
Zaxcom ZFR300NC Miniature Bodypack Recorder w/ NeverClip

Zaxcom ZFR300NC Miniature Bodypack Recorder w/ NeverClip

£1,434.00 (£1,195.00 Exc. VAT)
In stock now
Brand: ZaxcomModel: ZFR300NC
+
Key Features:
  • The Zaxcom Flash Recorder is a bodypack style recorder with timecode
  • Audio is recorded to a removable microSD card
  • Uses the highly reliable MARF (Mobile Audio Recording Format)
  • This eliminates file corruption common to recordings
See More...
S-ZAX-ZFR300NC
Information

Zaxcom ZFR300NC Miniature Bodypack Recorder w/ NeverClip

The ZFR300 (Zaxcom Flash Recorder) is a bodypack style recorder with timecode. Audio is recorded to a removable microSD card using the highly reliable MARF (Mobile Audio Recording Format) which eliminates file corruption common to recordings due to a dead battery or early card removal.

It's the same size as Zaxcom TRXLA3 wireless transmitter and accepts standard lavaliere microphones via the 3-pin micro LEMO connector.

The ZFR can be used as an easy way to record ISO tracks on multiple talent with no fears of being out of range or having to deal with RF issues.

Since all files are timecode stamped, post-production can easily drop any number of each ZFR's ISO tracks into their non-linear edit system and have a clean timecoded audio track to work with.

Virtual Multitrack Recording System

Any number of ZFR recorders and wireless transmitters can be utilized to form an unlimited virtual multi-track recording system with full ZaxNet control.

Recording systems can be as simple as a single ZFR recorder and a single ERX3TCD receiver to wirelessly monitor the audio and timecode from the recorder. Any number of ZFR recorders and wireless transmitters can be utilized to form an unlimited virtual multi-track recording system. The advantage of this system is that for production sound it eliminates the limitations of wireless microphones.

NeverClip™

NeverClip™ is a standard feature of the ZFR300. It works by utilizing two A-D converters to extend the dynamic range of the transmitter to 123 dB, so there’s never any limiter distortion.

ZaxNet™

ZFR300 is equipped with ZaxNet™, a long-range remote-control system allowing the user to send timecode, adjust pre-amp gain, and place the unit in record, playback, and stop modes – all without ever needing to disturb talent.

ZaxNet™ QC Audio

On power up the ZRF will jam timecode by receiving the ZaxNet 2.4 GHz signal and will then start transmitting QC audio with timecode within 10 seconds. The built-in ZaxNet transmitter can be used for quality control monitoring and as a timecode master to wirelessly jam other recording bodypack recorders or recording wireless transmitters. The bodypacks can optionally re-jam timecode every few minutes to maintain sub-frame accurate timecode lock. At the end of your shoot, you gather each SD memory card from the ZFR and deliver them to post.

Power

The ZFR300 runs in two AA batteries with a run time of up to 12 hours of runtime.

Specifications

Specifications

Recorder Audio
Dynamic Range123 dB
Distortion<0.01%
Frequency Response20 Hz to 16 kHz
Highpass FilterOff or 70 to 220 Hz, step
Mic Power3.3 VDC @ 10mA max
Mic Connector3-pin micro LEMO (mic side = FGB.00.303.CLAD22)
Input Range-60 to -24 dBu
Impedance4.7 k ohms
ADC Bit-depth24 bits
Timecode Reader / Generator
Clock Accuracy1.54 PPM (1 frame out in 6 hours)
Timecode TypeSMPTE
Timecode Rame-rates23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF
Recording
MediamicroSD card (Flash memory)
File Format.ZAX
Recording TimeCard dependent – Up to 96 hours on a 16GB card
2.4 GHz ZaxNet
RF Frequency Range2.403 to 2.475 GHz
RF ModulationDigital Spread Spectrum
RF Frequency Step0.001 GHz (1 MHz)
RF Bandwidth1 MHz
Channel Separation2 MHz
Physical
Weight3.1 oz without battery
Dimensions (H x W x D)3.0″ x 2.4″ x .65″
PowerUp to 12 hours (2 AA lithium or NiMH)
DisplayGraphic LCD panel
Reviews (0)

Be the first to Write a Review for this item!

Hire

Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.

Shipping

If shipping is required, we require a two day minimum hire period, with a travel day inbetween.

Cancellations

Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.

Insurance

Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

*
*
Existing Customer
*
*
Please provide your contact telephone number.
*
Please provide the name and model of the product(s) you are enquiring about hiring.
*
What is the date range that you are looking to hire this/these product(s) for?
*
Please add the two numbers