Add To Wishlist
Lectrosonics DSR5P 2-Channel Digital Hybrid Receiver w/ TA5M Output
Related Products

Frequencies


A1B1: 470 - 614MHz
B1C1: 567 - 691MHz
961: 961 - 1014MHz

Lectrosonics DSR5P 2-Channel Digital Hybrid Receiver w/ TA5M Output

Key Features

  • Two independent channels, compact design
  • Vector diversity for superior performance
  • Latest generation of SR Series: Compatible with huge existing ecosystem
  • Front panel output: Control panel TA5M with two balanced outputs
  • Compatible with D2, HDM, Duet and DCHX Digital modes and all hybrid modes
  • 24 bit/48 kHz digital for flawless audio
  • AES 256-bit, CTR mode encryption, with 4 different key policies available
  • Analog and AES3 digital audio outputs
  • External DC powering options and USB input for firmware updates and data transfer

The DSR5P digital receiver provide the highest level of RF and audio performance available with a versatile feature set in a compact design for camera mounted applications. Settings can be made from the front panel, making the unit ideal for use in camera hop configurations, in bags and on sound carts. An RF spectrum analyzer and SmartTune are built into the receivers to alleviate interference problems in an increasingly congested RF spectrum.

The mechanical design of the receivers fits into the SuperSlot ecosystem and combines field-proven features developed over many years of experience in motion picture and television production. To decrease weight, the DSR provide a two channel receiver in one unit powered by external DC. The receivers are also equipped with an IR port for data transfer between units. The machined aluminum housing and panels are surfaced with a hard-anodized finish with laser etched markings to withstand the rigors of field production.

The RF gain stages in the front end use a newly developed design to provide low noise RF amplification, excellent sensitivity and extremely low susceptibility to intermodulation and de-sensitization.

Vector Diversity

An ideal diversity system constructively combines all the energy available at both antennas. Traditional “true diversity” or “ratio diversity” methods use two complete receivers and blend the audio. This works well for FM and Digital Hybrid systems, but falls short of the ideal for today’s all-digital modes. The DSR's Diversity subsystem smoothly and continuously combine RF signals from two receiver front ends per channel, with differing phase angles in order to obtain maximum energy. Not only does this method deliver clean, artifactfree performance in all modes, it is actually able to take two signals compromised by multipath interference and reassemble them into a usable signal.

Compatibility

The DSR5P offers compatibility with the D-Squared and Duet digital transmitters, including the DBu, DHu, DPr, DBSM, DCHT, and M2T, and backward compatibility with any Digital Hybrid Wireless® transmitters including the SM and SMWB series, WM, HM Series, MM400 Series, HH Series, LT, LMb, UM400 Series, and SSM.

SmartNR™

With a noise floor at -120 dBV and a frequency response to 20 kHz, high frequency noise in the source audio is more apparent than in conventional wireless systems. The SmartNR algorithm has three modes. When OFF, no noise reduction is performed. When NORMAL is selected, enough noise reduction is applied to remove most of the hiss from the mic preamp and some of the hiss from lavaliere microphones. When FULL is selected, enough noise reduction is applied to remove most of the hiss from nearly any signal source of reasonable quality, assuming levels are set correctly at the transmitter.

Specifications

Operating Frequencies (MHz): A1B1: 470.100 - 614.375
B1C1: 537.600 - 691.175
961: 961.100 - 1014.900
Frequency Selection Steps: 25 kHz
Frequency Stability: ±0.001 %
Front end bandwidth: ±5.5 MHz, @ -3 dB
Sensitivity: 20 dB Sinad: 0.9 uV(-108 dBm), A weighted 60 dB Quieting: 1.12 uV (-105 dBm), A weighted
AM rejection: >60 dB, 2 uV to 1 Volt
Modulation acceptance: 85 kHz
Spurious rejection: 85 dB
Third order intercept: +11 dBm
Diversity method: Vector diversity
Antenna inputs: 50 Ohm; SMA female connectors
Audio output connectors: • Interchangeable D connector adapters or camera slot interfaces
• Dual TA3 male (mini XLR) balanced output adapter
• Battery sled adapters with TA3 male outputs
Front panel output:(5P model only) Control panel TA5M with two balanced outputs
Audio Performance (overall system):
Frequency Response: 25 Hz to 20 kHz (+0/-3 dB)
THD: 0.2% (typical)
SNR at receiver output (dB): *
No Limiting OFF: 103.5
NORMAL: 107.0
FULL: 108.5
w/Limiting OFF: 108.0
NORMAL: 111.5
FULL: 113.0
Input Dynamic Range: 125 dB (with full Tx limiting)
Overall Latency (time delay): 1.4 ms with digital source, <2.9 ms with Hybrid TX
Audio Test Tone: 1 KHz, -50 to +7 dBu, <1%THD
Controls:
Front Panel: • Color LCD display
• Menu/Sel, Pwr/Back, Up/Down Arrow Buttons
• USB Port
• IR Port
Rear Panel: Proprietary connector for audio/power accessory panels.
External Power: Minimum 9 Volts to maximum 17 VDC 2.7 W; 225 mA at 12 VDC
Weight: DSR 164 grams (5.8 oz.) w/o audio adapter
Dimensions: 3.23” wide x 1.23” high x 5.50” deep 82 wide x 31 high x 140 deep mm

*Note: The dual envelope “soft” limiter provides exceptionally good handling of transients using variable attack and release time constants. Once activated, the limiter compresses 30+ dB of transmitter input range into 4.5 dB of receiver output range, thus reducing the measured figure for SNR without limiting by 4.5 dB.

Be the first to Write a Review for this item!

Hire Equipment

We have an extensive inventory of audio equipment for hire with competitive rates ready at a moment's notice. We pay the most meticulous attention to detail in our hire prep so you can travel to shoots with the peace of mind that you have everything you need.

Weekly Rental

For weekly rental, you can pick up your gear the day before your production shoot after 3:00pm, and return by 10:00am after your shoot day. In the case of 7 day rental, you will only be charged for 4 billing days.

Shipping

If shipping is required, we require a two day minimum hire period, with a travel day inbetween.

Cancellations

Orders can be cancelled for free up to 24 hours before pick up date, any notice within 24 hours of the pick up date will be charged a prep fee of 25% of the total amount.

Insurance

Customers will provide a certificate of insurance listing Everything Audio as "loss payee" and "additional insured".

*
*
 
 
*
*
Please provide your contact telephone number.
*
Please provide the name and model of the product(s) you are enquiring about hiring.
*
What is the date range that you are looking to hire this/these product(s) for?
*
Please add the two numbers

Lectrosonics DSR5P 2-Channel Digital Hybrid Receiver w/ TA5M Output

Stock:
Out of stock  

Out of stock

Brand: LectrosonicsPart Number:  DRS5P
£3,199.00(£2,665.83 Exc. VAT)(List: £3,899.00)
Key Features:
  • Two independent channels in a sturdy, compact design
  • Vector diversity for superior performance
  • Latest generation of SR Series: Compatible with huge existing ecosystem
  • Compatible with D2, HDM, Duet and DCHX Digital modes and all hybrid modes
See More...
Get in touch!

FREE UK Delivery

When you spend over £1,000, you automatically qualify for FREE UK Delivery with our DPD courier service.

Our price promise

Found it cheaper elsewhere? Get in touch and we’ll try our best to match it.

Finance available

Finance is available upon request. Simply get in touch with our team for details.

Hire equipment

We've an extensive inventory of audio equipment for hire, with competitive rates.